Abstract:Since the recycling of waste original cement-stabilized macadam (OCSM) base has important environmental and economic significance, the addition of emulsified asphalt to OCSM to form emulsified recycled OCSM (ER-OCSM) can improve the flexibility of recycled mixtures. However, the influence of emulsified asphalt on the mechanical performance of such mixtures remains to be investigated. This study presents a gradation design and ER-OCSM established using the step-by-step filling method and investigated the mechanical properties of the ER-OCSM mixture. The apparent characteristics, crushing value and needle-like particle content of the OCSM milling material were tested. Based on step-by-step filling theory, the appropriate test method to achieve a uniform and dense state according to the characteristics of different aggregates was selected, and the dense skeleton gradation design method for recycled cement macadam was obtained. The mechanical properties of the ER-OCSM were analyzed by performing indoor physical laboratory tests. The natural gradation of the OCSM milling material exceeded the gradation range recommended in the Technical Guide for the Promotion of Science and Technology of the Construction Project of the Main Highway in Jiangsu Province (Trial), but the designed gradations were basically within the range. At the same age and temperature, the flexural strength and dynamic elastic modulus of the ER-OCSM decreased gradually with an increase in the emulsified asphalt content. Because ER-OCSM had temperature-sensitive characteristics, the adhesiveness of the asphalt between particles in the mixture decreased with increasing temperature, which was manifested as the unconfined compressive strength, flexural tensile strength and dynamic elastic modulus decreasing with an increase in temperature (the decrease was slight within 5–25°C but noticeable within 25–60°C). Furthermore, a higher emulsified asphalt content caused a more noticeable decrease. The flexural strength of the tested ER-OCSM showed noticeable correlations with the splitting strength, unconfined compressive strength and dynamic elastic modulus. The proper addition of emulsified asphalt can reduce the rigidity of ER-OCSM. However, the emulsified asphalt content should be strictly controlled; otherwise, the mechanical properties of the material will decrease greatly, adversely impacting the comprehensive road use performance.

Experimental Investigation of the Rheological Properties, Interaction, and Microstructure Characteristics of Emulsified Asphalt with Red Mud–Based Geopolymer

Assessment of Interaction Behaviors of Cement-Emulsified Asphalt Based on Micro-Morphological and Macro-Rheological Approaches

Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers

Materials design and strength development of a novel cold recycled mixture with asphalt emulsion and geopolymer

Adhesion Improvement between RAP and Emulsified Asphalt by Modifying the Surface Characteristics of RAP

Quantitative assessment and mechanism analysis of modification approaches for cold recycled mixtures with asphalt emulsion

Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course

Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material

Improving the high-temperature performance of cold recycled mixtures by polymer-modified asphalt emulsion

Mechanical properties of emulsified recycled cement-stabilized macadam based on step-by-step filling gradation design.

A Study on the Performance of Asphalt Modified by Desulfurized Waste Rubber/Ethylene Vinyl Acetate Composite with Additives

Investigation into Rheological Behavior of Warm-Mix Recycled Asphalt Binders with High Percentages of RAP Binder

Rheological Properties and Modification Mechanism of Emulsified Asphalt Modified with Waterborne Epoxy/Polyurethan Composite

Chemical, morphological and rheological investigations of SBR/SBS modified asphalt emulsions with waterborne acrylate and polyurethane

Examining the Rheological and Adhesion Performance of Asphalt: Insights into the Influence of SARA Components

Laboratory Performance of Recycled Polyethylene Modified Epoxy Asphalt Binders

Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Bonding, rheological, and physiochemical characteristics of reclaimed asphalt rejuvenated by crumb rubber modified binder

Study on the Properties of Waste Oil-Activated Crumb Rubber-Modified Asphalt Based on Molecular Dynamics Simulation and Rheology

Investigation of the Rheological Properties and Storage Stability of Waste Polyethylene/Ethylene–Vinyl Acetate-Modified Asphalt with Crosslinking and a Silicone Coupling Agent