Abstract:The precise extraction of a thin slice (lamellae) from nano electronic devices using a focused ion beam (FIB) is crucial for transmission electron microscopy analysis, but it remains a challenge for 100 nm and beyond scale device components. In this study, we introduce a new method that utilizes the device's own features as markers during FIB thinning process by continuously monitoring the intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This allows for the targeted extraction of the desired device component with high precision. We successfully demonstrate the effectiveness of this approach by extracting lamellae from 100 nm length channel in arrayed carbon nanotube film field-effect transistors using FIB lift-out. Lay Description: In today's semiconductor industry, nanoscale and even atomic-scale investigation of the processing and product quality of nanodevices is essential, for which the combination of focused ion beam (FIB) and transmission electron microscope (TEM) is a commonly used tool. A key requirement is to ensure the TEM examined device components are precisely defined during the FIB process, which is becoming a challenge particularly for 100 nm scale (and beyond) nanodevices. In this study, the authors propose and further demonstrate a self-marked method that enables the feasibility of extracting sub-100 nm components of nanodevices (using the state-of-the art carbon nanotube transistor as a demo) using FIB, by continuously monitoring intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This article is protected by copyright. All rights reserved.

Pioneering preparation and analysis of a clean surface on a microcrystal, mined by a focused ion beam

Self-marked preparation of site-specific transmission electron microscope lamellae of nanodevices using focusing ion beam technique.

Composition Control of Electron Beam Induced Nanodeposits by Surface Pretreatment and Beam Focusing

Controlling crystal cleavage in Focused Ion Beam shaped specimens for surface spectroscopy

Application of the Focused-Ion-Beam Technique for Preparing the Cross-Sectional Sample of Chemical Vapor Deposition Diamond Thin Film for High-Resolution Transmission Electron Microscope Observation

Graphite Nanoeraser

Ultra-smooth single crystal diamond surfaces resulting from implantation and lift-off processes

In Situ Sputtering From the Micromanipulator to Enable Cryogenic Preparation of Specimens for Atom Probe Tomography by Focused-Ion Beam

Atomically Flat Surface Preparation for Surface-Sensitive Technologies

Developments in microfabrication of mineral samples for simultaneous EBSD–EDS analysis utilizing an FIB–SEM instrument: study on an S–type cosmic spherule from Antarctica

Characterization of critically cleaned sapphire single-crystal substrates by atomic force microscopy, XPS and contact angle measurements

Preparation of well-defined samples of AlPdMn quasicrystals for surface studies

In situ preparation and determination of CeO2 high-index surface atomic structures

Development of procedures for obtaining clean, low-defect-density Ge(100) surfaces

A graphite nanoeraser.

Atomic observation on diamond (001) surfaces with non-contact atomic force microscopy

Benchmarking Diamond Surface Preparation and Fluorination Via Inductively Coupled Plasma-Reactive Ion Etching

Precise Manipulation and Patterning of Protein Crystals for Macromolecular Crystallography Using Surface Acoustic Waves.

From Crater Eruption to Surface Purification of Raw Silicon: A Treatment by Pulsed Electron Beam

Local Crystallography Analysis for Atomically Resolved Scanning Tunneling Microscopy Images

Sub-microanalysis of Solid Samples with Near-Field Enhanced Atomic Emission Spectroscopy