Abstract:An innovative two-phase model updating technique is developed to accurately assess the mechanical state of an in-service cable-stayed bridge. In the first stage, a sensitivity analysis is performed to select the updating parameters. Objective functions are established according to the measured values and numerical results of the static performance of the in-service cable-stayed bridge. The finite-element model updating of the bridge is developed into a multiobjective optimization problem. The Pareto optimal solution set for the updating parameters is solved using the genetic algorithm. In the second stage, the fuzzy outranking method is adopted to rank the noninferior solutions from the first stage and identify the best compromise solution for the updating parameters. The proposed two-phase model updating technique is applied to assess the dead load mechanical state of Haihe Bridge (old) in Tianjin China. Periodic field measurements are also conducted to detect its actual mechanical state after 10 and 12 years of service. The relative differences between the original numerical results and the periodic measurements of cable forces are up to −17.15%. However, after model updating, the relative differences between the calculated and periodically measured values of cable forces are controlled within ±10% throughout. The results indicate that the updated model can reproduce the periodic field measurements with considerably improved accuracy. Based on the updated model, the vertical deformation of the main span girder is evident, and that of the side span girder is small. The maximum girder vertical deformation of Haihe Bridge (old) is −0.271 m and is located at approximately 3/4 of the main span.

Cable-stayed Bridge Model Updating Based on Static and Dynamic Test Data of Multi-state

Finite Element Model Updating for Cable-Stayed Bridge Based on Field Testing

Finite Element Model Updating for a Cable-stayed Bridge Considering the Boundary Condition Constraint and Parameter Sensitivity

Experimental Investigation Of Finite Element Model Updating For The Cable-Stayed Bridge

Mechanical State Assessment of In-Service Cable-Stayed Bridge Using a Two-Phase Model Updating Technology and Periodic Field Measurements

Finite Element Model Updating of Bridge Structures Based on Sensitivity Analysis and Optimization Algorithm

Double-layer model updating for steel-concrete composite beam cable-stayed bridge based on GPS

Finite element modeling and model updating for a cable-stayed bridge

Model Updating of Laboratorial Long-Span Cable-Stayed Bridge

Updating of Dynamic Model for Long-Span Bridges Based on Structural Sensitivity Analysis and Optimization Design Principle

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating

Research on Bridge Structural Health Assessment Based on Finite Element Analysis

MULTI-PHASE FE MODEL UPDATING ON LONG-SPAN CABLE-SUPPORTED BRIDGES

A substructure method for structural model updating of long-span cable-stayed bridges

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

FE Model Updating on an In-Service Self-Anchored Suspension Bridge with Extra-Width Using Hybrid Method

Finite Element Model Updating of Long-Span Cable-Stayed Bridge Based on the Response Surface Method of Radial Basis Function

Updating of Bridge Finite Element Model Based on Optimization Design Theory

Dynamic Test and Finite Element Model Updating of Bridge Structures Based on Ambient Vibration