Abstract:Plasma jet triggered gas gap switch has obvious advantages in fast control switch.The development of the plasma in the ambient medium is the key factor affecting the triggering conduction of the gas switch.However,the plasma jet process and its characteristic parameters are complicated and the existing test methods cannot fully characterize its development laws.In this work,a two-dimensional transient fluid calculation model of the plasma jet process of the gas gap switch is established based on the renormalization-group k-e turbulence equation.The results show that the characteristic parameters and morphological evolution of the plasma jet are basically consistent with the experimental results,which verifies the accuracy of the simulation model calculation.The plasma jet is a long strip with an initial velocity of 1.0km·s-1 and develops in both axial and radial directions.The jet velocity fluctuates significantly with axial height.As the plasma jet enters the main gap,the pressure inside the trigger cavity drops by 80％,resulting in a rapid drop in the jet velocity.When the plasma jet head interacts with the atmosphere,the two-phase fluid compresses each other,generating a forward-propelled pressure wave.The plasma jet heads flow at high velocity,a negative pressure zone is formed in the middle part of the jet,and the pressure peak decreases gradually with height.As the value of the inlet pressure increases,the characteristic parameters of the plasma jet increase.The entrainment phenomenon is evident,which leads to an increase in the pressure imbalance of the atmospheric gas medium,leading to a significant Coanda effect.Compared with air,the characteristic parameters of a plasma jet in SF6 are lower,and the morphological evolution is significantly suppressed.The results of this study can provide some insight into the mechanism of action of the switch jet plasma development process.

Large-Time-Step Particle-in-Cell/Monte Carlo Simulation of the Streamer Initiation Process in a Laser-Triggered Gas Switch

Compensated Monte Carlo Collision Model for Particle-In-Cell Simulation in High-Pressure Plasmas

Compensated particle in cell-Monte Carlo collision model with wide time step limit

Simulation of laser triggered gas switch with cylindrical electrodes on pre-breakdown stage

Particle-in-Cell/Monte Carlo Simulation of Positive Streamers with Photoionization Model

Numerical Modeling of Different Streamer Breakdown Modes of Gas Switch under the External Circuit

3D Particle‐in‐cell Simulation of Positive Streamer Initiation in Highly Pressurized Gaseous, Liquid and Supercritical CO 2 with Field Ionization

Particle-In-Cell/Monte Carlo Collisional Simulation Of Negative Streamer Formation And Branching Between Planar Electrodes

Monte Carlo Simulation of Laser-Ablated Particle Splitting Dynamic in a Low Pressure Inert Gas

Stochastic and self-consistent 3D modeling of streamer discharge trees with Kinetic Monte Carlo

3D Pic-Mcc Simulations of Positive Streamers in Air Gaps

Simulation on Short-Gap Streamer Discharge in Gases Using the Lattice Boltzmann Method

2D Particle-in-cell/monte Carlo Collisional Simulation of the Plasma Initiation in the Vacuum Breakdown Stage

Integrated Simulation Approach for Laser-Driven Fast Ignition

Investigation on Discharge Mechanism of a Particle Beam Triggered Gas Switch

Weakly Convergent Stochastic Simulation of Electron Collisions in Plasmas

Particle-in-cell and Monte Carlo Collision Simulations of the Cathode Sheath in an Atmospheric Direct-Current Arc Discharge

Modeling of Streamer-to-spark Transitions in the First Pulse and the Post Discharge Stage

Numerical Simulation and Experimental Verification of Plasma Jet Development in Gas Gap Switch

Numerical Simulation of Gas Breakdown in Microgaps Based on PIC/MCC Method