Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Simulation on Short-Gap Streamer Discharge in Gases Using the Lattice Boltzmann Method

Research and Development on Short Gap Streamer Discharge Simulation Methods

Numerical Simulation on Streamer Discharge of Short Air Gap of Atmospheric Air

Discontinuous Galerkin method for short air gap discharge simulations and its applications

Numerical Simulation of Streamer Discharge Modeled by Drift-Diffusion Equations Based on SETD Method

Lattice-Boltzmann Method for Gas Flow in Microchannels

Study on Gas Discharge at Atmospheric Air by Numerical Method

The simulation of streamer dynamics in the air gap

Numerical Simulations for the Quasi-3D Fluid Streamer Propagation Model: Methods and Applications

2-D Discontinuous Galerkin Method for Streamer Discharge Simulations in Nitrogen

A positivity-preserving scheme for the simulation of streamer discharges in non-attaching and attaching gases

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Numerical simulation of streamer evolution in surface dielectric barrier discharge with electrode-array

Simulation of 2D Sudden-Expansion Flow Using the LB Method

Simulation of Positive Streamers in Atmospheric Air by a Macroscopic Model with a New Branching Criterion

A Local Discontinuous Galerkin Method for 1.5-Dimensional Streamer Discharge Simulations

Approximate Analytical Method of Streamer Discharge: Mathematical Equation

A spectral element method for modelling streamer discharges in low-temperature atmospheric-pressure plasmas

Adaptive Mesh Refinement and Embedded Boundary Method for Streamer Discharge Simulations

A model comparison of 2D Cartesian and 2D axisymmetric models for positive streamer discharges in air

An Efficient and Accurate MPI Based Parallel Simulator for Streamer Discharges in Three Dimensions