Abstract:Explosives combustion is primarily classified into conductive and convective combustion. In situations where confinement is sufficiently strong, the instantaneous high pressure generated by convective combustion in cracks can cause rapid fragmentation of the explosive matrix, resulting in a significant increase in the combustion surface area and triggering a high-intensity reaction with potentially catastrophic consequences. Therefore, the study of convective combustion in cracks is crucial for ensuring the safety of weapons and explosives. Previous simulation studies have primarily used finite element analysis software, which has excellent performance in handling explosive detonation processes. However, its accuracy in describing gas behavior between explosives and constrained containers is limited. This study divides the combustion process of a pre-cracked explosive in a confined space into four stages based on reasonable assumptions and simplifications. We developed a simulation method that combines the Arrhenius formula with the MWSD model to model the combustion rate of the explosive. By introducing a correction coefficient, Con, to the Arrhenius formula, the formula and MWSD model control the first and third stages of explosive combustion, respectively, while smoothly transitioning during the second stage. We used this method to numerically simulate the experimental results of Shang Hailin et al. on a crack width of 50 μm. The simulation results include the temperature field and pressure field of the first three stages of explosive combustion and the pressure rise curve of the pressure measurement point at the same location, as in the experiment. The simulation results are consistent with the experimental results.

A Damage-Power Evaluation Method of the Explosive-Involved Device in a Confined Container Storing Liquid

Experimental Study about Influence of SEFAE Device Structure on SEFAE Damage-power

Method of Determining the Critical Impact Velocity of Energetic Devices

TNT equivalency method in confined space based on steel plate deformation

Damage behavior of concrete members subjected to underwater contact explosion

Study on evaluation method for driving fragment ability of explosives

Testing and evaluation of the thermal damage caused by an explosion of energetic materials

Design method of explosion container for slow speed cook-off test of small quantity explosive

Influences of Inner Shells Outside Disperse Explosive on SEFAE Damage Power

Experimental and Numerical Investigation of a Hollow Cylindrical Water Barrier Against Internal Blast Loading

Development of Two-layer Explosion-containment Vessel with 2 Kg TNT Equivalent

Experimental Research on Damage-Power Evaluation of FAE Warhead

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Experimental Research on the Characteristic of Impact Caused by a Blast of Inflammable Mixture to a Rigid Wall

Experimental study on critical collapse of concrete targets subjected to internal explosion

Numerical Study on Containing Detinating Location after the Target Based on the Overload of Fuze

Establishment and analysis of damage calculation model under fuel air explosion effect

Investigation of the Deflagration to Detonation Transition in Pressed High Density Explosives

Study on Composite Explosive with High Power

Mitigation effects on the reflected overpressure of blast shock with water surrounding an explosive in a confined space

An Experimental Study On The Impact Damage Of Explosives