Abstract:The ideal adhesion work (W-ad), tensile failure process, and electronic properties for gamma-Fe (111)/alpha-Al2O3 (0001) interface with Al-and O-terminated were systematically investigated by the first-principles calcu-lations based on density functional theory. The results showed that the Al-terminated interface with Hcp-site and the O-terminated interface with Hcp-site were the most stable structures in all types of Fe/Al2O3 interfaces. However, the W-ad of the Al-and O-terminated interface were 1.465 and 7.102 J/m(2), respectively, indicating that the bonding strength of the O-terminated interface was significantly stronger than that of the Al-terminated interface. Then the tensile test exhibited the critical strain of O-terminated was 9.5% higher than that of Al-terminated interface and the ideal tensile strength was 3.5-fold that of Al-terminated. Remarkably, the failure position of the Al-terminated Fe/Al2O3 interface occurred exactly at the interface, but that of the O-terminated Fe/Al2O3 interface occurred inside the Al2O3 phase. In-depth analysis of electronic structure showed that the behavior of electrons transfer and orbital hybridization occurred near the failure position during stretching, and electron depletion between atomic layers was a signal of fracture. Further, the minimum overlap population of chemical bonds causes fractures in advance when the tensile deformation reaches critical strain. Interestingly, the failure structure of O-terminated found that Fe and O form new atomic layers, and the behavior of bonding has occurred between the two atoms. (C) 2021 Elsevier B.V. All rights reserved.

First-principles calculation of the structure and the energy of ZrO 2/Al2O3 nanomultilayer

First-Principles Calculation on Metal-Ceramic Interfaces

Structure, mechanical properties and thermal stability of CrAlN/ZrO 2 nanomultilayers deposited by magnetron sputtering

Electronic Structure, Bonding, and Mechanical Strength at the Α-Al2o3 (0001)/L12-Al3zr (111) Interface by First-principles Calculations

Electronic Structure, Bonding, and Mechanical Strength at the Α-Al 2 O 3 (0001)/L12-Al3zr 2-Al 3 Zr (111) Interface by First-Principles Calculations

First-Principles Calculations on Crystal Structure and Thermodynamic Properties of Ceramics

First-principle Calculations on the Al/L12-Al3Zr Heterogeneous Nucleation Interface

First-principles calculations of γ-Al2O3/Al interfaces

Influence of Interfacial Structure on the Mechanical and Thermal Properties of CrAlN/ZrN Multilayer Coatings

A First-Principles Study on Interfacial Properties of Ni(001)/Ni3Nb(001)

First-principles study on stability, adhesion and fracture properties of ZrO2/W interface in composite materials

Interface properties of Ti3SiC2/Al2O3 ceramics: Combined experiments and first-principles calculations

Characterizing the ZrC(111)/c-ZrO2(111) Hetero-Ceramic Interface: First Principles DFT and Atomistic Thermodynamic Modeling

Ab initio supported study on the selective adsorption-induced microstructural difference of (Ti,Al)N/TiN and (Ti,Al)N/ZrN multilayers

Structure and adhesion of Zr/Mo thin-film interface by PVD: A first-principles prediction

Interface structure and mechanical properties of the nanolayered AL/PD thin films

A comprehensive experiments and calculations on the Cr/Zr interface behaviour of Cr coated Zr cladding

Revealing the Atomic-Scale Structure and the Fracture Mechanism of the Α-Al2o3/γ-fe Ceramic-Metal Interface

Study of spinodal decomposition and formation of nc-Al2O3/ZrO2 nanocomposites by combined ab initio density functional theory and thermodynamic modeling

First-Principles Investigation of the Shear Properties and Sliding Characteristics of C-Zro2(001)/α-al2o3(11¯02) Interfaces

First-Principles Calculation On Adhesions Of Ni/Al2o3 And Ni/Zro2 Interfaces