Abstract:The integration of high-temperature resistant geopolymer concrete, reinforced with basalt fiber reinforced polymer (BFRP), addresses several challenges encountered by conventional reinforced concrete structures, such as elevated energy consumption, substantial carbon emissions, and susceptibility to steel corrosion. To investigate the impact of geopolymer concrete cover on the mechanical performance of BFRP bars after high temperature treatment, this study conducted mechanical tests on a total 406 tensile specimens and 406 transverse shear specimens, spanning a temperature range from ambient temperature to 700 °C. The BFRP bars with diameters of 6 mm, 12 mm, and 16 mm underwent heat treatment durations of 0 h, 1 h, 2 h, and 3 h. Subsequently, they were examined for mass loss rat, residual tensile properties, and residual shear strength following natural cooling. Notably, this study also compared the impact of different geopolymer concrete cover thickness (30 mm, 40 mm, and 50 mm) on these performance parameters. The test results revealed that with an increase in heating temperature, the resin of BFRP experienced decomposition, leading to alterations in surface morphology, as well as changes in tensile and shear failure modes. In the temperature range of 400 °C to 700 °C, bare BFRP bars exhibited a significant decrease in both tensile and transverse shear strengths, with strength loss rates ranging from 50% to 90%. Moreover, the degradation in shear strength was comparatively slower than that in tensile strength. The presence of geopolymer concrete cover effectively mitigated the strength degradation of BFRP bars following high temperature treatment, and this protective effect improved with an increase in the concrete cover thickness. Additionally, scanning electron microscope (SEM) analysis was employed to elucidate the damage mechanisms for both bare and geopolymer concrete-covered BFRP bars. SEM results indicated that the deterioration induced by high temperature treatment gradually propagated radially from the edge to the core area of the bar. Finally, a simplified calculation model was adopted to evaluate the residual tensile strengths of BFRP bars wrapped in geopolymer concrete after high temperature treatment.

Influence of elevated temperature on the mechanical and thermal performance of BFRP rebar

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Experimental Study on the Mechanical Properties of Basalt Fibres and Pultruded Bfrp Plates at Elevated Temperatures

Experimental Investigation on Post-Fire Mechanical Properties of Glass Fiber-Reinforced Polymer Rebars

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

The effect of temperature on the mechanical properties of hybrid FRP bars applicable for the reinforcing of concrete structures

Effect of geopolymer concrete cover on improving tensile and transverse shear behaviors of BFRP bars after exposure to high temperature

Creep Behavior Of Resin Matrix And Basalt Fiber Reinforced Polymer (Bfrp) Plate At Elevated Temperatures

Effects of Elevated Temperatures on the Mechanical Properties of Basalt Fibers and BFRP Plates

Experimental Research on Mechanical Behavior of GFRP bars under High Temperature

Combined Effects of Sustained Tensile Loading and Elevated Temperatures on the Mechanical Properties of Pultruded BFRP Plates

Investigation of the bond properties between hybrid fiberreinforced concrete and BFRP bars after exposure to high temperature

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Interfacial Performance of Aramid, Basalt and Carbon Fiber Reinforced Polymer Bonded Concrete Exposed to High Temperature

Flexural Fatigue Behavior of a Pultruded Basalt Fiber Reinforced Epoxy Plate Subjected to Elevated Temperatures Exposure

Investigation of Residual Strength of GFRP Bar Reinforced Concrete Beams with Recycled Materials Under Elevated Temperature

Infrared Laser Heating of GFRP Bars and Finite Element Temperature Field Simulation

Experimental study on the triaxial compression mechanical performance of basalt fiber-reinforced recycled aggregate concrete after exposure to high temperature

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Experimental and Theoretical Study on Flexural Behavior of GFRP- and CFRP-Reinforced Concrete Beams after High-Temperature Exposure