Abstract:Small-size parts have a small surface area and complex structure. The traditional mark splicing method needs to manually paste marks on the surface of parts, resulting in missing the measurement data of the surface and becoming holes. The feature splicing method requires the surface of parts to have easily distinguishable geometric or distance features, which are not suitable for rotating parts containing repetitive features. We propose a scanning measurement method without marks based on mechanical splicing, which does not need to paste marks or depend on the surface features of parts. Firstly, the camera calibration method based on photogrammetry is used to reconstruct the high-precision three-dimensional coordinates of the target on the calibration board. By tracking the position of the coded target, the rotation matrix corresponding to different angles of the turntable is established, and the direction vector of the rotation axis and the fixed point coordinates on the axis are solved. Then the synchronous calibration of the rotation axis and the camera is completed. Secondly, based on the accurate calibration of poses of two rotation axes, the rotation mosaic matrix is constructed by using the turntable angle to realize the rough registration of multiview point clouds. Finally, based on the Normal Iterative Closest Point (NICP) algorithm, the fine registration of the point clouds is completed. Experimental results show that the angle error between the two rotation axes calibrated by the target tracking method is 0.023 degrees lower than that of the traditional standard ball fitting method. After calibration, the average size error of the standard ball is less than 0.012 mm. In the automatic measurement of small-size parts, the point cloud splicing effect of the mechanical splicing method after fine registration is similar to that of the mark splicing method, and the splicing stability is higher. The mechanical splicing method is suitable for the 3D topography measurement of small-size parts where the marks cannot be pasted.

Visual Measurement System of the Pitch Length of Large Scale Mooring Chains＇ Five Neighboring Links

Vision-Based Position Deviation Measurement of Rail Corrugation Chord Measuring Points under Bi-Linear Laser Assistance

Anchoring Chain Measurement Using Automated Optical Inspection

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

The Study Of Network Measurement Based On Vision Coordinates Measurement Using Single Camera

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Position and pose measurement technology of space combination ground experiment based on machine vision

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Global Measurement Method for Large-Scale Components Based on a Multiple Field of View Combination

Scanning Measurement Method of Small Size Parts Without Marks

Monocular Visual Measurement Based on Marking Points Regression and Semantic Information

Wireless Binocular Stereovision Measurement System Based on Improved Coarse-to-Fine Matching Algorithm

Industrial Vision Measuring System for Large Dimension Work-Pieces

A Two-Step Calibration Method for Vision Measurement with Large Field of View

Transverse and Longitudinal Vibration Measurement of Vertical Rope of Hoisting System Based on Machine Vision

Three-Dimensional Measurement Method for Tube's Endpoints Based on Multi-view Stereovision

Global Calibration for Muti-Camera Videogrammetric System with Large-Scale Field-of-view

High Precision Visual Dimension Measurement Method with Large Range Based on Multi-Prism and M-Array Coding

Freely expandable visual measurement network for large scale space based on auto calibration method

STUDY ON LARGE SIZE ARC LENGTH ON－LINE MEASURING SYSTEM OF SECTION DIMENSION OF SPACECRAFT COMPARTMENT

Pose measurement method for non-cooperative space vehicle using multiple non-overlapping cameras