Abstract:Stress relaxation property is critical to evaluating low temperature anti-cracking performance of asphalt materials. A preliminary attempt was made to measure and model the short term stress relaxation behavior of the wet process crumb rubber modified asphalt binder within linear viscoelastic (LVE) region. The strain amplitude sweep test was implemented with a dynamic shear rheometer to identify the LVE region and maximum critical strain of the asphalt. Subsequently, the stress relaxation curve of the sample binder was obtained by carrying out the shear stress relaxation test, which was then fitted using the Zener model and Power law model to set up the stress relaxation model. Results showed the maximum critical strain of crumb rubber modified asphalt at 10 °C ~ 15 °C was around 1%, suggesting the control strain should not surpass 1% when trying to capture the linear viscoelastic behavior of crumb rubber modified asphalt at lower temperatures. Additionally, higher temperature related to greater maximum critical strain and broader linear viscoelastic region, and crumb rubber content showed limited effect on the maximum critical strain whereas it showed significant effect on the storage and loss moduli and phase angle of the asphalt. Furthermore, the stress inside the asphalt finally relaxed to zero at 10 °C ~ 15 °C, suggesting typical viscoelastic liquid behavior. Its relaxation process could be divided into the rapid relaxation stage and steady relaxation stage. Temperature showed obvious influence on the relaxation property at the rapid relaxation stage and lower temperature led to greater relaxation modulus. However, the influence of temperature in the steady relaxation stage was limited. The Power law model was more preferred than the Zener model because it better represented the viscoelastic liquid behavior of the crumb rubber modified asphalt. This work was expected to shed some light on evaluation of the low temperature stress relaxation performance of crumb rubber modified asphalt and to promote the application of crumb rubber modified asphalt technology under the "carbon neutrality" background.

Relaxation modulus prediction of asphalt-rubber concrete based on micromechanics

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Research of Method for Solving Relaxation Modulus Based on Three-Point Bending Creep Test

Study on Conversion Between Creep Compliance and Relaxation Modulus of Asphalt Mixture

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Study on Relaxation Damage Properties of High Viscosity Asphalt Sand under Uniaxial Compression

A New Short-Term Aging Model for Asphalt Binders Based on Rheological Activation Energy

Study on the Properties of Waste Oil-Activated Crumb Rubber-Modified Asphalt Based on Molecular Dynamics Simulation and Rheology

Experiment and Representation of Stress Relaxation Behavior of Crumb Rubber Modified Asphalt

Modulus Prediction of Asphalt Concrete with Imperfect Bonding Between Aggregate–asphalt Mastic

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Aging Properties and Mechanism of Microwave-Activated Crumb Rubber Modified Asphalt Binder

The Discrete and Continuous Retardation and Relaxation Spectrum Method for Viscoelastic Characterization of Warm Mix Crumb Rubber-Modified Asphalt Mixtures

Evaluation of Performance on Crumb-Rubber-Modified Asphalt Mixture

Elastic Modulus Prediction of Asphalt Concrete Based on Composite Material Micromechanics Model

Modulus of Recycled Hot Mix Asphalt: Micromechanical Modeling and Experimental Approaches

Effect of crumb rubber and reclaimed asphalt pavement on viscoelastic property of asphalt mixture

Selection of Optimal Warm-Mix Additive for Recycled Crumb-Rubber Modified Asphalt Binder Based on Rheological Tests and Viscoelastic Models

Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions

Micromechanics-Based Prediction Models and Experimental Validation on Elastic Modulus of Recycled Aggregate Concrete