Abstract:Turbulent heat transfer in channel flows is an important area of research due to its simple geometry and diverse industrial applications. Reynolds-Averaged Navier–Stokes (RANS) models are the most-affordable simulation methodology and are often the only viable choice for investigating industrial flows. However, accurate modelling of wall-bounded flows is challenging in RANS, and the assessment of the performance of RANS models for heated turbulent channel flow has not been sufficiently investigated for a wide range of Reynolds and Prandtl numbers. In this study, five RANS models are assessed for their ability to predict heat transfer in channel flows across a wide range of Reynolds and Prandtl numbers (Pr) by comparing the RANS results with respect to the corresponding Direct Numerical Simulation data. The models include three Eddy Viscosity Models (EVMs): standard k−ε, low Reynolds number k−εLS, and k−ωSST, as well as two Reynolds Stress Models (RSMs): Launder–Reece–Rodi and Speziale–Sarkar–Gatski models. The study analyses the Reynolds number effects on turbulent heat transfer in a channel flow at a Pr of 0.71 for friction Reynolds number values of 180,395,640, and 1020. The results show that all models accurately predict velocity across all Reynolds numbers, but the accuracy of mean temperature prediction drops with increasing Reynolds number for all models, except for the k−ωSST model. The study also analyses the Pr effects on turbulent heat transfer in a channel flow with Pr values between 0.025 and 10.0. An error analysis is performed on the results obtained from different turbulence models, and it is shown that the k−ωSST model has the smallest error for the predictions of the mean temperature and Nusselt number for high-Prandtl-number flows, while the low Reynolds number k−εLS model shows the smallest errors for low-Prandtl-number flows at different Reynolds numbers. An analytical solution is utilised to identify Pr effects on forced convection in a channel flow into three different regimes: analytical region, transitional region, and turbulent diffusion-dominated region. These regimes are helpful to discuss the validity of the models in relation to the Pr. The findings of this paper provide insights into the performance of different RANS models for heat transfer predictions in a channel flow.

Turbulence Models for Fluid Flow and Heat Transfer Between Cross-Corrugated Plates

Comparative Study on the Characteristics of Film Flow with Different Corrugation Plates

Influence of corrugation profile on the thermalhydraulic performance of cross-corrugated plates

A Comprehensive Evaluation of Turbulence Models for Predicting Heat Transfer in Turbulent Channel Flow across Various Prandtl Number Regimes

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

Performance assessment of turbulence models in CFX for predicting heat transfer of supercritical water

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger

Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations

Assessment Of Performance Of Turbulence Models Of Cfx In Predicting Supercritical Water Heat Transfer In A Vertical Tube

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Turbulence Modelling for Supercritical Pressure Heat Transfer in Upward Tube Flow

Numerical Analysis on Supercritical Water Heat Transfer in a 2 × 2 Rod Bundle

Turbulence models performance to predict fluid mechanics and heat transfer characteristics of fluids flow in micro-scale channels

Turbulence Modeling for Mass Transfer Enhancement by Separation and Reattachment with Two-Equation Eddy-Viscosity Models

CFD Prediction for Multi-Jet Impingement Heat Transfer

Numerical Simulation of Flow Around Square Cylinder Using Different Low-Reynolds Number Turbulence Models

ICONE19-43282 TURBULENCE MODELING FOR MASS TRANSFER IN SEPARATED AND REATTACHING FLOWS FOR FLOW-ACCELERATED CORROSION

Numerical Investigation of the Thermohydraulic Performance of Double-Wave Cross-Corrugated Passages