Abstract:Polysulfone (PSF) membranes are broadly applied in many fields owing to good physicochemical stability, resistance to oxidation and chlorine. But when treated with wastewater containing oil, PSF membranes are easy to be contaminated for its hydrophobicity, which can result in the declining of flux and lifespan of the membrane and limit their application in large scale. To enhance the capability of PSF membrane in the above circumstances, phosphorylated Zr-doped hybrid silica particles (SZP particles) were firstly prepared. SZP particles have various point defects inside their structure and lots of hydroxide radicals on their surface. SZP particles were added to the porous matrix of PSF to prepare a novel composite membrane (SZP/PSF) through a phase inversion process. Finally, the optimum preparation conditions of SZP/PSF composite membranes were determined. The optimum conditions are: the mass ratio of PSF, PEG400 and SZP is 12:10:10; ultrasound 10min inside each 30min; the pre-evaporating time is 10s. Optimized SZP/PSF composite membrane was characterized by scanning electron microscope (SEM) and ultrafiltration experiment. The results indicate that SZP particles can be uniformly dispersed in SZP/PSF composite membranes with excellent hydrophilic property, antifouling capability and tensile strength. Therefore, it can be concluded that the optimized SZP/PSF composite membrane is desirable in the treatment of wastewater containing oil and wastewater.

Preparation and characterization of Al 2O 3-POSS hybrid films on quartz fiber

The Preparation and Characterization of PMMA/POSS-OH Hybrid Fiber

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite

Preparation And Characterisation Of Al2o3 Film On Hollow Glass Microspheres By The Sol-Gel Process

Study on the Preparation and Properties of Polyimide/silica/alumina Nano-Composite Film

Preparation and characterization of polyimide/Al2O3 hybrid films by sol–gel process

Synthesis and Characterization of Corona-Resistant Polyimide/Silica and Alumina Hybrid Films

Preparation of Inorganic Nanoparticles/Polyimide Hybrid Film by Sol Gel Method

Synthesis And Characterization Of Silica-Alumina Co-Doped Polyimide Film

Preparation of Polyimide/silica-Alumina Hybrid Film

Preparation and film properties of SiO2@P(MMA/BA/3FMA) composite nanoparticles

Effects of Poly(methylphenylsiloxane) Coating on High Silica Glass Fiber/Phosphate Composites

Synthesis and characterization of silica–alumina co-doped polyimide film

Preparation and Characterization of Polyimide/Inorganic Hybrid Film

Preparation And Properties Of Polystyrene-Gamma-Methacryloxypropyl Trimethoxy Silane Copolymer/Zirconia Nanohybrid Materials

The magic of POSS-based fluoropolymers and their self-assembled surface for protective coatings

Preparation of KH570-SiO2 and their modification on the MF/PVA composite membrane

Preparation and characterization of phosphorylated Zr-doped hybrid silica/PSF composite membrane.

In situ formation of POSS layer on the surface of polyimide film and anti-atomic oxygen of SiO 2 /POSS coatings

Fabrication and Characterization of Ceramic Coatings with Alumina–silica Sol-Incorporated Α-Alumina Powder Coated on Woven Quartz Fiber Fabrics