Abstract:A continuum damage mechanics (CDM) failure model, which can predict both the initiation and propagation of cracks in brittle materials such as ceramics and nuclear graphite, has been developed and implemented into the commercial finite element code ABAQUS. In this model, both the stress-based failure criterion and fracture-mechanics-based failure criterion are used to define the damage surface, and a softening parameter 'n' is adopted to control the rate of damage development. Specifically, a change in the softening parameter changes the shrinkage rate of the damage surface, thus giving rise to different traction-displacement behaviors at the interface where crack initiation and propagation are taking place. This paper studies the effect of the degree of softening in the CDM model on the predicted strength of brittle materials subjected to loadings with different stress gradients. 0. FOREWORD The failure of brittle materials, such as nuclear graphite and ceramics, is not only a function of component geometry and size but also of loading mode. Therefore, full-size component testing is often required to determine the failure loads. Although various computational methods have been developed to predict the lifetime and failure load of brittle components, the absence of a satisfactory failure model is still an impediment to accurate failure predictions. Several commonly used failure models of graphite were reviewed in Ref. (1). The authors showed that simple models based on critical stress, critical strain and critical strain energy density criteria were remarkably unsuccessful in describing the experimental results. A continuum damage mechanics (CDM) model (2) has been developed for nuclear graphite at the Manchester School of Engineering (MSE), University of Manchester. The CDM model can be viewed as an extension or generalization of the cohesive zone model (3), in that it couples together the effects of mode-I and mode-II loadings. An interface with no thickness is introduced into the continuum solid at positions where potential crack surfaces may form. Within the interfacial constitutive law, which relates tractions and displacements across the interface, a damage parameter is introduced to take account of the effects of damage such as mcro-cracking. A damage surface is then constructed using both the conventional stress-based and fracture-mechanics-based failure criteria. Therefore, the CDM model can predict both the initiation and propagation of cracks in components with high stress concentration or even stress singularity.

Failure Mechanism and Its Simplified Models of Brittle Material Withordered Multi-Fissures under Uniaxial Compression

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression

Fracture and Damage Evolution of Multiple-Fractured Rock-like Material Subjected to Compression

Modeling of Compression-Induced Splitting Failure in Heterogeneous Brittle Porous,Solids

Frictional Sliding of Microcracks under Compression

Numerical Study of Mechanical Properties and Microcrack Evolution of Double-Layer Composite Rock Specimens with Fissures under Uniaxial Compression

Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression

Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression

On Failure Modes and Strength Characterization of Brittle Disordered Materials under Uniaxial Compression and Tension

Fracture and Multiple-Cracking Modelling of Strain-Hardening Cementitious Composites

A Micro-Macro Dynamic Compressive-Shear Fracture Model under Static Confining Pressure in Brittle Rocks

Discrete element modeling on crack evolution behavior of sandstone containing two oval flaws under uniaxial compression

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression

THE EFFECT OF SOFTENING ON THE PREDICTED STRENGTH OF BRITTLE MATERIALS USING A CONTINUUM DAMAGE MECHANICS FAILURE MODEL

Experimental and Meshless Numerical Simulations on the Crack Propagation of Semi-Circular Bending Specimens Containing X-Shaped Fissures Under Three-Point Bending

A Micro–macro Model of Pore Pressure Effect on Shear Fracture in Brittle Rocks under Compression

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD