Abstract:The acidic (pKa ≈1.5–2.5) and hygroscopic nature of poly(3,4-ethylene dioxythiophene) polystyrene sulfonate, used as a common hole-injection layer in optoelectronic devices, has a detrimental effect on device stability and is associated with well established device failure mechanisms. In this work, a process with a high green index hole-injection layer material (V2O5) and low surface roughness (RMS roughness ≈1.3 nm) was developed for demonstrating a hybrid polymer–inorganic perovskite light-emitting diode. Test devices with the new hole-injection layer demonstrate nearly identical maximum current efficiencies (4.23 vs 4.19 cd/A), and luminous efficacies (2.99 vs 2.32 lm/W) when compared to a control device fabricated with the conventional hole-injection layer. Furthermore, the peak brightness was achieved at a current density one-third of the value for the control device. To examine the transport of holes in the above hole-injection layer, we carried out device simulations based on a physical charge control model, including defect-assisted tunneling for hole injection. Close agreement for current–voltage characteristics is observed. Experimentally measured mobility in the device and measured radiative lifetimes were found to be sufficient to achieve this agreement without resorting to the introduction of a sheet charge at the injection interface. Despite the use of a bulk-heterojunction device architecture, the model predicts high radiative recombination rates [≈5.6×1022/(cm3s)] in the emissive layer, consistent with the measured photophysical properties for the active film, suggesting effective passivation of non-radiative surface states.

Hole transparent and hole blocking transport in single-crystal-like organic heterojunction: when rods hold up disks.

A van der Waals pn heterojunction with organic/inorganic semiconductors

Porous Organic Polymer Films with Tunable Work Functions and Selective Hole and Electron Flows for Energy Conversions

Crystalline organic heterostructures engineering based on vanadyl phthalocyanine and rod-like conjugated organic semiconductors with selected central groups

Organic Heterojunctions Formed By Interfacing Two Single Crystals From A Mixed Solution

Precise Synthesis of Organic Heterostructures Via the Synergy Approach of Polymorphism and Cocrystal Engineering for Optical Applications

Switching from Electron to Hole Transport in Solution-Processed Organic Blend Field-Effect Transistors

Small gap semiconducting organic charge-transfer interfaces

Preparation of Single-Crystalline Heterojunctions for Organic Electronics

Organic Heterostructures in Organic Field-Effect Transistors

Single-Crystal-Like Organic Heterojunction with 40 Nm Thick Charge Accumulation Layers

Hole‐Carrier‐Dominant Transport in 2D Single‐Crystal Copper

Probing Carrier Transport and Structure-Property Relationship of Highly Ordered Organic Semiconductors at the Two-Dimensional Limit.

Sub-5 nm single crystalline organic p–n heterojunctions

Synthesis of model heterojunction interfaces reveals molecular-configuration-dependent photoinduced charge transfer

Role of Hole Playing in Improving Performance of Organic Light-Emitting Devices with an Al2o3 Layer Inserted at the Cathode-Organic Interface

Observation of Hole Hopping Via Dopant in Moox-Doped Organic Semiconductors: Mechanism Analysis and Application for High Performance Organic Light-Emitting Devices

Defect-assisted hole transport through transition metal oxide-based injection layers for passivated nanocrystalline CsPbBr3 emissive thin films: A combined experimental and modeling study

Film-forming Hole Transporting Materials for High Brightness Flexible Organic Light-Emitting Diodes

Molecular layer modulation of two-dimensional organic ferroelectric transistors

Realization of Vertical and Lateral Van Der Waals Heterojunctions Using Two-Dimensional Layered Organic Semiconductors