Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Interstitial Fluid (ISF) is a naturally occurring body fluid that surrounds cells and tissues and contains certain markers useful for continuously monitoring glucose levels in the blood without constantly extracting it. Miniaturizing can reduce its cost and timescale. In this study, for continuous glucose monitoring the numerical analysis of a Polymethyl methacrylate (PMMA) based Micro-miniature venturi pump was carried out to extract Interstitial Fluid (ISF). The numerical study was carried out using COMSOL Multiphysics software by employing the k-ε turbulence model to obtain output as a vacuum at the throat of the pump. The micro-miniature venturi pump was numerically analyzed for several key parameters, including the dimensions of the throat, the convergent angle, and the divergent angle. This study obtained a minimum pressure of 49.41 kPa numerically and 70 kPa experimentally when an input pressure of 252 kPa of compressed air was given to the system. Further influence of turbulence kinetic energy and turbulence dissipation rate on throat pressure output have been notified. Notably, the pressure output reaches its minimum value of 49.41 kPa when the turbulent kinetic energy and the turbulent dissipation rate reach maximum values of 5.0 × 109 m2/s3 and 7000 m2/s2 respectively. As per the previous research findings, for continuous glucose monitoring through ISF extraction, a pressure level of 95 kPa is deemed adequate hence the designed micro-miniature venturi pump is suitable for this application.

Interstitial Fluid Transdermal Extraction Tool Based on Microfluidics Technology

A PDMS Interstitial Fluid Transdermal Extraction Tool

An integrated microfluidic system for interstitial fluid transdermal extraction

An Interstitial Fluid Transdermal Extraction System for Continuous Glucose Monitoring

An interstitial fluid transdermal extraction, collection and measurement system

An Interstitial Fluid Transdermal Extraction Chip with Vacuum Generator and Volume Sensor for Continuous Glucose Monitoring

A Portable Instrument for Continuous Glucose Monitoring by the Integration of Microfluidic Chip and Micro Glucose Sensor

Design, Fabrication and Testing of A Micro-Venturi Tube for Fluid Manipulation in A Microfluidic System

A time-of-flight flow sensor for the volume measurement of trace amount of interstitial fluid

Exploration of micro-miniature venturi pump for continuous glucose monitoring through interstitial fluid (ISF) extraction

A Micro PDMS Flow Sensor Based on Time-of-flight Measurement for Conductive Liquid

Study on minimally invasive blood glucose monitoring detector based on interstitial fluid transdermal extraction

Minimally Invasive Transdermal Extraction Technique of Human Interstitial Fluid

Syringe-assisted Point-of-care Micropumping Utilizing the Gas Permeability of Polydimethylsiloxane

Research and Fabrication of a Micro Flowmeter Based on PDMS

Enhanced Interstitial Fluid Extraction and Rapid Analysis via Vacuum Tube-Integrated Microneedle Array Device

Analysis of Blood Glucose Concentration by Interstitial Fluid Extracted in A Minimally Invasive Way

Micromachined biosensor system for interstitial fluid sampling and glucose monitoring

A Touch-Actuated Glucose Sensor Fully Integrated with Microneedle Array and Reverse Iontophoresis for Diabetes Monitoring.

Optimum Design of the Micro-Venturi for Microfluidic Driving

Swellable PVA/PVP Hydrogel Microneedle Patches for the Extraction of Interstitial Skin Fluid Toward Minimally Invasive Monitoring of Blood Glucose Level.