Abstract:To remove the nitro aromatic compounds (NACs) and SO32- from distillate of 2,4,6-trinitrotoluene (TNT) red water, the carboxylated and aminated polystyrene (PSt) microspheres were used as adsorbents. GC-MS and HPLC analysis were used to determine the types and concentrations of NACs before and after adsorption. The carboxylated PSt, which was prepared by modifying PSt with phthlandione (PA), could remove the neutral NACs including 2,6-dinitrotoluene (2,6-DNT), 2,4-dinitrotoluene (2,4-DNT), 1,3,5-trinitrobenzene (1,3,5-TNB), and 2,4,6-trinitrotoluene (2,4,6-TNT), with the acid 2,4-dinitrophenol (2,4-DNP) and SO32- remained in the distillate. The aminated PSt that was synthesized by activating PSt with chloroacetyl chloride follow by reaction with 1,2-ethanediamine (EDA) could remove all the NACs and SO32-. The results suggested that EDA-PSt adsorbed the NACs though multimode interactions, i.e., hydrogen bond and electrostatic attraction. After adsorption using EDA-PSt, chemical oxygen demand (COD) was reduced from 86.1 to 11.2 mg L-1, and a colorless, transparent, and nontoxic solution with neutral pH value was obtained. Five grams of EDA-PSt could purify 1600 cm(3) of distillate of TNT red water, and the adsorbents could be recycled by elution with methanol to desorb the neutral NACs followed by elution with 0.1 mol L-1 NaOH to wash off 2,4-DNP and SO32-. (c) 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 127: 1578-1584, 2013

Extraction of organic materials from red water by metal-impregnated lignite activated carbon

Extraction of Organic Materials from Red Water by Metal-Impregnated Lignite Activated Carbon.

Adsorption Behavior and Removal of Organic Materials from Tnt Red Water by Lignite Activated Carbon

Organic Pollution Removal from TNT Red Water Using Cu-Impregnated Activated Coke

Organic Pollutants Removal from 2,4,6-Trinitrotoluene (TNT) Red Water Using Low Cost Activated Coke.

Modification of a Na-montmorillonite with Quaternary Ammonium Salts and Its Application for Organics Removal from TNT Red Water

Removal of Organic Materials from Tnt Red Water by Bamboo Charcoal Adsorption

Investigation of organic matter adsorption from TNT red water by modified bamboo charcoal

Cu/N doped lignin for highly selective efficient removal of As(v) from polluted water

Removal of Organic Pollutants from Red Water by Magnetic-Activated Coke

Preparation and study of straw porous biochar with aromatic ring structure for adsorption performance and mechanism toward TNT red water

Removal of Organic Pollutants from Super Heavy Oil Wastewater by Lignite Activated Coke

Pretreatment of TNT red water by iron-carbon micro-electrolysis process

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Removal of Nitro Aromatic Compounds from 2,4,6-Trinitrotoluene Red Water Using 1,2-Ethanediamine Modified Macroporous Polystyrene Microspheres

Reduction in Chemical Oxygen Demand of TNT Red Water Using Layered Double Hydroxide Prepared from Red Mud and Brucite

Removal of Dinitrotoluene Sulfonate from Explosive Wastewater by Electrochemical Method Using Ti/IrO 2 As Electrode

Removal of Nitro Aromatic Compounds and Sulfite Acid from Distillate of 2,4,6‐trinitrotoluene Red Water Using Modified Porous Polystyrene Microspheres

Efficient Recovery of Cu(II) by LTA-zeolites with Hierarchical Pores and Their Resource Utilization in Electrochemical Denitrification: Environmentally Friendly Design and Reutilization of Waste in Water

Treatment of dinitrotoluene sulfonates in TNT red water by active carbon supported and active coke supported NZVI

In Situ Modification of Activated Carbon Made from Camellia oleifera Shell with Na2EDTA for Enhanced La3+ Recovery