Abstract:The removal of toxic heavy metals, which are usually complexed with organic ligands in real wastewater, is still a challenge currently. The green oxidant O3 has been widely applied in the oxidation of pollutants, but suffers from the dependency of HO· yield on water chemistry and also low recovery of metals. Here, we developed a new method, namely electrolysis-O3-GF-Ti, for efficiently removing the complexed Cu(II) via HO· oxidation and for simultaneously recovering Cu using graphite felt coated Ti mesh (GF-Ti) as the cathode. For Cu(II)-EDTA decomplexation, this process achieved more than 80% of TOC removal and 90% of Cu(II) recovery, which was significantly more efficient than those of electrolysis, ozonation or electrolysis-O3-Ti. The cathodic O3 reduction was responsible for the efficient production of HO· in the process, as proved by the simultaneous enhanced decomposition of O3 and degradation of HO· probe (p-chlorobenzoic acid) but insignificant formation of H2O2 by electrolysis. Mechanism study with HPLC spectrum and mass spectrometry evidence combined with SEM-EDX and XRD analysis revealed electrolysis-O3-GF-Ti of Cu(II)-EDTA was a stepwise decarboxylation process, and the formed decomplexed Cu(II) intermediates were reduced as Cu0 at the GF-Ti surface. The results of cathodic characterization and continuous 5-cycle experiments demonstrated GF-Ti is an excellent renewable cathode. Moreover, over 90% of Cu was recovered in treatment of Cu(II) complexed with different chelators (nitrilotriacetic acid, citrate, tartrate, etc.), and more than 80% from authentic electroplating wastewater. This study would provide a promising alternative for destruction of metal complexes and recovery of heavy metals.

Efficient Recovery of Cu(II) by LTA-zeolites with Hierarchical Pores and Their Resource Utilization in Electrochemical Denitrification: Environmentally Friendly Design and Reutilization of Waste in Water

Efficient electrocatalytic nitrate reduction via boosting oxygen vacancies of TiO2 nanotube array by highly dispersed trace Cu doping

Denitrification Enhancement by Electro-Sorption/reduction Using a Layered Metal Oxide Electrode Loaded with Pd-Cu Nanoparticles

Efficient Removal of Heavy Metal Ions from Aqueous Systems with the Assembly of Anisotropic Layered Double Hydroxide Nanocrystals@carbon Nanosphere.

Removal of Cu(II) Contamination from Aqueous Solution by Ethylenediamine@β-Zeolite Composite

Superstable Mineralization of Heavy Metals Using Low-Cost Layered Double Hydroxide Nanosheets: Toward Water Remediation and Soil Fertility Enhancement

Use of a Waste-Derived Linde Type-A Immobilized in Agarose for the Remediation of Water Impacted by Coal Acid Mine Drainage at Pilot Scale

Heavy Metal Adsorption with Zeolites: the Role of Hierarchical Pore Architecture

Ultrafast Removal of Cu(II) by a Novel Hierarchically Structured Faujasite-Type Zeolite Fabricated from Lithium Silica Fume.

Fabrication and Characterization of a Cu-Zn-TiO<sub>2</sub>Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Sustainable and reagent-free cathodic precipitation for high-efficiency removal of heavy metals from soil leachate.

Effective nitrate removal with high N2 selectivity by active-site-rich particle electrode of bentonite-based Cu-Fe LDH composite

Refining metallic nano-copper by electron-rich black carbon for superior Fenton-like catalysis in water purification: The capacitive regulation of corrosive electron transfer

Fabrication and Characterization of a Cu-Zn-TiO2 Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Highly efficient and selective nitrate electroreduction to ammonia catalyzed by molecular copper catalyst@Ti 3 C 2 T x MXene

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Achieving efficient and stable electrochemical nitrate removal by in-situ reconstruction of Cu2O/Cu electroactive nanocatalysts on Cu foam

Enhanced electroreduction of low-concentration nitrate using a Cu-Pd bimetallic cathode system: Performance evaluation, mechanism analysis, and potential applications

Electrochemical Removal of Nitrate by Cu/Ti Electrode Coupled with Copper-Modified Activated Carbon Particles at a Low Current Density.

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Decomplexation of Cu(II)-EDTA over Oxygen-Doped G-C3n4: an Available Resource Towards Environmental Sustainability