Performance of a Ceramic Moving Bed Biofilm Reactor for Treatment of Low Strength Sewage

Zhen WEI,Yongyou HU,Ping FANG

DOI: https://doi.org/10.13671/j.hjkxxb.2011.01.015

2011-01-01

Abstract:A bio-ceramic moving bed biofilm reactor (BCMBBR) was designed and tested for treating municipal sewage with a low organic loading (COD:130~185 mg·L-1,C/N:3~7)in south China. This study was intended to determine the optimum operating conditions and key factors of the system for performance improvement and regulation. The results showed that under the optimum operating conditions of the system (ceramic-filling rate=30%,hydraulic retention time=8 h and gas-water ratio=4:1)the removal efficiencies were 83.3% COD,85.7% BOD5,85% NH+4-N,48.7% TN,32.3% TP and 82.1% SS. This study suggests that a microscopic anaerobic and aerobic denitrification environment can be easily achieved in the BCMBBR using a bio-ceramic due to its good porosity and easy implementation. As a key factor,aeration intensity significantly affects the overall performance of BCMBBR. Control of the gas-water ratio between 4:1 and 6:1 was the optimal regulation stratagem for BCMBBR treatment of wastewater with high ammonia nitrogen content and low carbon content. A low gas-water ratio was suitable for nitrogen removal in the BCMBBR. In combination with the well-fluidized ceramic,it is advisable to choose a low aeration intensity to control the DO around 3 mg·L-1 if increase of the effluent C/N is observed. And the high TP removal efficiency could be achieved by application of enhanced coagulation technology based on the addition of PAC and PAM. In summary,BCMBBR was demonstrated to be more effective than MBBR technology for treatment of the wastewater containing high ammonia nitrogen and low carbon.