Abstract:The biofouling characteristics of a sequential anoxic/aerobic-membrane bioreactor (A/O MBR) were analyzed during the three-stage process (fast-slow-fast transmembrane pressure (TMP) increasing). The results indicated: during the stage 1 (before day 1), the microbial communities in the activated sludge (AS), cake sludge (CS) and biofilm (BF) were similar to each other, and the adsorption of microbes and the metabolic products was the main factor that led to TMP increase; during the stage 2 (between day 1 and day 7), the cake layer begun to form and the TMP continued to rise gradually at a reduced rate compared to stage 1, at this point a characteristic microbial community colonized the CS with microorganisms such as Saprospiraceae and Comamonadaceae thriving on the membrane surface (BF) probably due to greater nutrient availability, and the predominance of these species in the microbial population led to the accumulation of biofouling metabolic products in the CS, which resulted in membrane fouling and the associated rise in TMP; during the final stage (after day 7), the biofilm had matured, and the activity of anaerobes stimulated cake compaction. The statistical analysis showed a correlation between the TMP changing rate and the carbonhydrates of soluble microbial products (SMPc) content in the CS. When the SMPc concentration rose slowly there was a low level of biofouling. However, when the SMPc accumulating rate was greater, it resulted in the more severe biofouling associated with the TMP jump. Furthermore, the correlation coefficient for the TMP increase and protein concentrations of extracellular polymeric substances (EPSp) in the CS was highly significant. The cluster analysis suggested that the AS microbial community remained stable during the three TMP change stages, while the CS and BF community were changed accompanied with the TMP change. The interaction between the microbial communities and the metabolic products lead to the significant correlation between them. The EPSp in conjunction with the SMPc were the main factors that accelerate the membrane fouling. The rapid rise of SMPc triggered a sudden increase in the TMP, while the accumulation of EPSp caused the sustained rise in TMP.

Impact of short mean cell residence time on biofouling and bacterial community in a membrane bioreactor

Study on membrane fouling of submerged membrane bioreactor in treating bathing wastewater.

Membrane Fouling Properties under Different Filtration Modes in a Submerged Membrane Bioreactor

Insights into Membrane Fouling of Submerged Membrane Bioreactors by Characterizing Different Fouling Layers Formed on Membrane Surfaces

Effective Control of Membrane Fouling by Filamentous Bacteria in a Submerged Membrane Bioreactor

Study on membrane fouling characteristics in a submerged membrane bioreactor (MBR)

Study on membrane fouling caused by activated sludge from a membrane bioreactor with long solid retention time

Effect of Sludge Retention Time on Membrane Bio‐Fouling Intensity in a Submerged Membrane Bioreactor

Influence of Filamentous Microbes on Dissolved Organic Matters and Membrane Fouling in Membrane Bioreactor(MBR)

Tracing biofouling to the structure of the microbial community and its metabolic products: a study of the three-stage MBR process

The Characteristics of Extracellular Polymeric Substances and Soluble Microbial Products in Moving Bed Biofilm Reactor-Membrane Bioreactor

Membrane Fouling in a Submerged Membrane Bioreactor (MBR) under Sub-Critical Flux Operation : Membrane Foulant and Gel Layer Characterization

Membrane Bioreactors Fed with Different COD/N Ratio Wastewater: Impacts on Microbial Community, Microbial Products, and Membrane Fouling

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

Influence of Fluorescent Substances on Membrane Fouling in Membrane Bioreactors (MBR)

The relationship between microbial community structure and anaerobic MBR membrane fouling at a room temperature

A comparison study on membrane fouling in A/O-MBR and A/A-MBR at different mixed liquor-suspended solids concentrations

Effect of Solid Retention Time on Membrane Fouling in Membrane Bioreactor: from the Perspective of Quorum Sensing and Quorum Quenching

Effect of Hydraulic Retention Time on Membrane Fouling and Biomass Characteristics in Submerged Membrane Bioreactors

The effect of solids retention times on the characterization of extracellular polymeric substances and soluble microbial products in a submerged membrane bioreactor.

A Comprehensive Study on Membrane Fouling in Submerged Membrane Bioreactors Operated under Different Aeration Intensities