Abstract:Manganese is widely distributed in the natural environment, and its presence in drinking water poses a risk to human health. In this study, an integrated pre-deposited powdered activated carbon (PAC) and manganese oxide (MnO x ) bio-functional layer of inorganic origin was coupled with gravity-driven ceramic membrane (GDCM) reactor. The study aims to investigate the effects of the membrane pore size and functional layer integrity on the Mn 2+ removal and flux. The results reveal that the average Mn 2+ removal efficiency of the large pore size membranes (300 kDa and 0.45 μm) was lower (75 % – 78 %) compared to those with smaller pores (15 kDa and 50 kDa) (87 % – 88 %) during long-term operation. Such differences are attributed to a period of manganese leakage before the PAC-MnO x matured in large-pore membrane units and a longer residence time in small-pore membranes. The functional layer leaded to reversible fouling, which was more prominent in membranes with larger pores (contributing to 93 % of total resistance) than those with smaller ones (ranging from 51.7 % to 61.9 %). Although the damaged functional layer resulted in occasional high Mn 2+ concentrations in the effluent, it did not significantly impact long-term flux development. Optical coherence tomography (OCT), in conjunction with COMSOL analysis, non-destructively evaluate biofilm formation process and indicate a homogeneous flow field and mass transfer in the "dual layers" (active film layer and ceramic membrane layer) of the GDCM. The presence of manganese-oxidizing bacteria ( Hyphomicrobium, Reyranella, and Pseudomonas ) in the GDCM reactor was verified using confocal laser scanning microscopy (CLSM) and high-throughput sequencing. Additional material characterization revealed that a portion of the PAC-MnO x exhibited characteristics of birnessite, with autocatalytic oxidation of Mn 2+ , and that Mn (III) and Mn (IV) were the primary species in MnO x , which exhibited excellent catalytic oxidation and adsorption capabilities for Mn (II), respectively. Overall, the developed PAC-MnO x GDCM system shows great promise in efficiently removing manganese and producing water of desired quality, thereby holding potential in applications across several sectors of advanced water treatment processes.

Treatment of Electrolytic Manganese Wastewater by Precipitation and Hydrophobic Hollow Fiber Membrane Process

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Manganese Removal from Aqueous Solution Using a Thermally Decomposed Leaf

Enhanced removal of Mn2+ and NH4+-N in electrolytic manganese metal residue using washing and electrolytic oxidation

Study on harmless treatment of electrolytic manganese residue by low temperature thermochemical method

Nucleation crystallization pelleting process for highly efficient manganese ion recovery in electrolytic manganese wastewater

Highly efficient Mn2+, Mg2+, and NH4+ recovery from electrolytic manganese residue via leaching, solvent extraction, coprecipitation, and atmospheric oxidation

A Green Method for Mn2+ and NH4+-N Removal in Electrolytic Manganese Residue Leachate by Electric Field and Phosphorus Ore Flotation Tailings

Simultaneous Optimizing Removal of Manganese and Ammonia Nitrogen from Electrolytic Metal Manganese Residue Leachate Using Chemical Equilibrium Model

Enhancing manganese removal through pre-deposition of powdered activated carbon-manganese oxide (PAC-MnO x ) film on gravity-driven ceramic membrane: The impact of biofilm integrity and fluid dynamics

A new electrochemical method for simultaneous removal of Mn2+and NH4+-N in wastewater with Cu plate as cathode

Simultaneous removal of groundwater manganese and ammonia nitrogen based on high-flux gravity driven ceramic membrane (HF-GDCM) coupled with aerated fluidized birnessite

A novel electrocoagulation-membrane stripping hybrid system for simultaneous ammonia recovery and contaminant removal

Enhanced removal of Mn2+ and NH4+-N in electrolytic manganese residue leachate by electrochemical and modified phosphate ore flotation tailings

Recovery of Manganese Ions from Aqueous Solutions with Cyanex 272 Using Emulsion Liquid Membrane Technique: A Design of Experiment Study

Gravity-driven ceramic membrane (GDCM) filtration treating manganese-contaminated surface water: Effects of ozone(O3)-aided pre-coating and membrane pore size

Electrodeposition of Manganese Metal and Co-production of Electrolytic Manganese Dioxide Using Single-membrane Double-chamber Electrolysis

Selective phosphate removal with manganese oxide composite anion exchange membranes in membrane capacitive deionization

Study on mutual harmless treatment of electrolytic manganese residue and red mud

Treatment of electroplating wastewater using electrocoagulation and integrated membrane

Insight into mechanisms of Mn and NH 4 + -N removal with recovery of Mn and Mg from electrolysis manganese residue (EMR): Effect of humus and NaOH