Enhancing manganese removal through pre-deposition of powdered activated carbon-manganese oxide (PAC-MnO x ) film on gravity-driven ceramic membrane: The impact of biofilm integrity and fluid dynamics

Qiao Wang,Mengyao Xiao,Ken Fang,Xing Du,Zhihong Wang,Xinglin Lu
DOI: https://doi.org/10.1016/j.seppur.2024.127051
IF: 8.6
2024-03-15
Separation and Purification Technology
Abstract:Manganese is widely distributed in the natural environment, and its presence in drinking water poses a risk to human health. In this study, an integrated pre-deposited powdered activated carbon (PAC) and manganese oxide (MnO x ) bio-functional layer of inorganic origin was coupled with gravity-driven ceramic membrane (GDCM) reactor. The study aims to investigate the effects of the membrane pore size and functional layer integrity on the Mn 2+ removal and flux. The results reveal that the average Mn 2+ removal efficiency of the large pore size membranes (300 kDa and 0.45 μm) was lower (75 % – 78 %) compared to those with smaller pores (15 kDa and 50 kDa) (87 % – 88 %) during long-term operation. Such differences are attributed to a period of manganese leakage before the PAC-MnO x matured in large-pore membrane units and a longer residence time in small-pore membranes. The functional layer leaded to reversible fouling, which was more prominent in membranes with larger pores (contributing to 93 % of total resistance) than those with smaller ones (ranging from 51.7 % to 61.9 %). Although the damaged functional layer resulted in occasional high Mn 2+ concentrations in the effluent, it did not significantly impact long-term flux development. Optical coherence tomography (OCT), in conjunction with COMSOL analysis, non-destructively evaluate biofilm formation process and indicate a homogeneous flow field and mass transfer in the "dual layers" (active film layer and ceramic membrane layer) of the GDCM. The presence of manganese-oxidizing bacteria ( Hyphomicrobium, Reyranella, and Pseudomonas ) in the GDCM reactor was verified using confocal laser scanning microscopy (CLSM) and high-throughput sequencing. Additional material characterization revealed that a portion of the PAC-MnO x exhibited characteristics of birnessite, with autocatalytic oxidation of Mn 2+ , and that Mn (III) and Mn (IV) were the primary species in MnO x , which exhibited excellent catalytic oxidation and adsorption capabilities for Mn (II), respectively. Overall, the developed PAC-MnO x GDCM system shows great promise in efficiently removing manganese and producing water of desired quality, thereby holding potential in applications across several sectors of advanced water treatment processes.
engineering, chemical
What problem does this paper attempt to address?