Abstract:The copolymerization of aniline and pyrrole in the presence of SBA-15 resulted in the formation of the SBA-15/PANI/PPy composite. Low-angle and wide-angle X-ray diffraction (XRD), Fourier transformed infra-red spectroscopy (FT-IR), Field emission scanning electron microscopy (FESEM), Thermo gravimetric analysis (TGA), High resolution transmission electron microscopy (HRTEM) and Brunauer–Emmett–Teller (BET) analysis were used to characterize the materials. The effects of pH, adsorbent amount, dye concentration, contact time and temperature on the removal of sunset yellow, indigo carmine, titan yellow and orange G dyes from aqueous solutions were investigated using adsorption techniques. From the low-angle XRD analysis, the peaks confirm the formation of a mesoporous SBA-15 (p6mm, hexagonal) structure. From FT-IR analysis, the peaks at 1568, 1492 and 1399 cm −1 are attributed to the C=C pyrrole ring and C–N stretching vibrations of aniline. The FESEM image of SBA-15 reveals that the structure exhibits a worm-like, folded morphology. The HRTEM image of the SBA-15/PANI/PPy composite showed that the mesopores are arranged in an orderly manner. Additionally, there are dark spots on it as a result of the polypyrrole and polyaniline being present. All of the dyes were removed with efficiency higher than 95%. The isotherm was confirmed to match the Langmuir isotherm model because the R 2 value for all dyes was greater than 0.99. Sunset yellow, indigo carmine, titan yellow, and orange G had maximum adsorption capacities of 476.19, 384.61, 500.00 and 625.00 mg/g, respectively. The adsorption kinetics followed a pseudo-second-order model and the R 2 value for all dyes was greater than 0.99. The thermodynamic parameters ΔG°, ΔS° and ΔH° all had negative values, indicating that the adsorption was spontaneous, decreased entropy, and exothermic. For five cycles, the SBA-15/PANI/PPy composite showed a 95% removal efficiency of dyes. Therefore, the prepared adsorbent can be used to clean industrial effluents that contain dyes.

Simulation of Indigo Carmine Dye Adsorption on Polymer Doped Sawdust in Fixed-Bed Systems

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Adsorption of Indigo Carmine Dye by Acacia nilotica sawdust activated carbon in fixed bed column

Column Adsorption of Aniline by a Surface Modified Jute Fiber and Its Regeneration Property

Adsorptive separation of food and textile dyes from aqueous solution by SBA-15 supported polyaniline/polypyrrole composite: isotherms, kinetics, thermodynamics and recyclability study

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Revealing the interface chemistry of polyaniline grafted biomass via statistical modeling of multi-component dye systems: optimization, kinetics, thermodynamics, and adsorption mechanism

Highly Crystalline Polyaniline Nanofibers Coating with Low-Cost Biomass for Easy Separation and High Efficient Removal of Anionic Dye ARG from Aqueous Solution

Application of an effective method in predicting breakthrough curves of fixed-bed adsorption onto resin adsorbent

Preparation of PVP-BiOBr Adsorbent for Efficient Indigo Carmine Dye Removal Using Flow-Circulation Systems

Removal of Methylene Blue by Polyaniline/TiO2 Hydrate: Adsorption Kinetic, Isotherm and Mechanism Studies

Preparation of a Novel Acid Doped Polyaniline Adsorbent for Removal of Anionic Pollutant from Wastewater

Adsorption of Anionic Acid Red G Dye on Polyaniline Nanofibers Synthesized by FeCl3 Oxidant: Unravelling the Role of Synthetic Conditions

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Adsorption Removal of Tannic Acid from Aqueous Solution by Polyaniline: Analysis of Operating Parameters and Mechanism.

Dynamic Adsorption of a Cationic Dye onto Wool Fibers as Column-Filling Media: Response Surface Optimization and Fixed-Bed Adsorption Modeling

Fe3O4@C@polyaniline trilaminar core–shell composite microspheres as separable adsorbent for organic dye

Adsorption-photocatalysis performance of polyaniline/dicarboxyl acid cellulose@graphene oxide for dye removal

Adsorption of anionic acid red G dye on polyaniline nanofibers synthesized by FeCl 3 oxidant: Unravelling the role of synthetic conditions

Equilibrium and Kinetics of Aniline Adsorption Onto Crosslinked Sawdust-Cyclodextrin Polymers

Remediation of organic pollutant from the aqueous environment using in-house fabricated polyaniline-based hybrid composite (PANI-MnPBA/NiCoMnS) materials