Abstract:One of the important failure criteria of press operations in industry for forming simulations is the Forming Limit Diagram (FLD). The complex loading effects on FLD, in particular the localized necking phenomenon under stretch-bending condition, have not been fully investigated and well understood. In practical sheet metal applications, the deformation is invariably three dimensional with a combination of stretching and bending. For most sheet materials under these complex loading processes used in industry, strong Bauschinger effect is observed, and the material hardening behavior tends to be anisotropic. This study aims to understand and evaluate such anisotropic hardening effect on the forming limit prediction under stretch-bending condition. The extended through-thickness Marciniak–Kuczynski (M–K) analysis is incorporated with Yoshida–Uemori (YU) two-surface kinematic hardening constitutive model, which has a more accurate description of the reverse loading behavior than that of the conventional isotropic hardening model. The material parameters used in this paper for YU model are calibrated with the experimental data from uniaxial large-strain tension-compression cyclic test. Both the isotropic hardening and YU kinematic hardening models with Hill'48 yield surface are employed in the analysis for the purpose of comparison. The Forming Limit Average Stress Diagram (FLASD) under stretch-bending condition is proposed to extend the understanding of Forming Limit Stress Diagram (FLSD) from in-plane to out-of-plane deformations. The “bending-ratio-dependent” phenomenon in forming limit diagram is predicted and observed in both stress/strain space with the proposed method. It suggests that the individual stress/strain state cannot represent system behavior. Forming limits under stretch-bending is suggested as an occurrence of system instability, not individual material instability. The system behavior of sheet metal deformation is reinforced as critical to the understanding of necking instability in stretch bending processes. The analysis shows that the Bauschinger effect provides positive effect in delaying the necking instability, predicting higher formability for sheet metals under stretch-bending. The insight obtained in this paper provides further understanding of the localized necking phenomenon under stretch-bending condition.

Loading Mode Effects on Sheet Formability in Viscous Pressure Forming (Vpf)

Effect of Loading Location of Viscous Medium on Sheet Deformation in Viscous Pressure Bulge (vpb) Test

Deformation behavior of sheet metals and viscous medium in viscous pressure bulging process with back viscous pressure

Viscous Pressure Forming (vpf): State-Of-The-Art and Future Trends

Development of Experimental Method to Improve Sheet Metal Formability by Transverse Normal Stress

Research on Formability of Aluminum Alloy 2024 Sheet by Viscous Pressure Forming

Prediction of Wrinkling and Fracturing in Viscous Pressure Forming (VPF) by Using the Coupled Deformation Sectional Finite Element Method

Numerical Study on Viscous Pressure Forming of Sheet Metal

An analytical model and its corresponding numerical algorithm for viscous pressure bulging process considering the effects of rate-dependent tangential adhesive stress

Formability Influenced by Process Loading Path of Double Sheet Hydroforming

EXPERIMENTAL STUDY ON EFFECT FACTORS OF VISCOUS ADHESIVE STRESS IN VISCOUS PRESSURE FORMING

Research on mechanism of springback control by viscous medium with different mechanical properties

Regional control of sheet metal formability via establishing differentiated pressure field using heterogeneous elastomers in flexible die forming process

Sectional Finite Element Analysis of Coupled Deformation Between Elastoplastic Sheet Metal and Visco-Elastoplastic Body

Research Status of Multi-way Loading Near-net Shape Forming

Numerical Investigations on the Influence of Superimposed Double-Sided Pressure on the Formability of Biaxially Stretched Aa6111-T4 Sheet Metal

Sheet metal forming limits under stretch-bending with anisotropic hardening

Numerical analysis of effect of material and processing parameters on thickness distribution during superplastic die bulging of cavity sensitive materials

Formability and Forming Load Analysis of Sheet Drawing under BHF and BHG

The Effect of Binder Layouts on the Sheet Metal Formability in the Stamping with Variable Blank Holder Force

Effect of variable blank-holder forces on the formability of aluminum alloy sheets during sheet metal forming