Abstract: Over the last one and a half decades, a great amount of research on the synthesis of carbon nanotubes has been carried out [1–5] since the first pioneering report of the discovery of multiwalled carbon nanotubes (MWCNTs) by Iijima [6]. Carbon nanotubes (CNTs) are generally produced by three main techniques: arc discharge, chemical vapor deposition (CVD), and laser ablation, although scientists are researching more economic ways to produce these structures. In arc discharge, a vapor is created by an arc discharge between two carbon electrodes with or without catalyst. Nanotubes self-assemble from the resulting carbon vapor. CVD synthesis is achieved by putting a carbon source in the gas phase and using an energy source, such as plasma or a resistively heated coil, to transfer energy to a reactive gaseous carbon molecule. This reactive carbon will deposit and grow on the catalyst (usually a first row transition metal such as Ni, Fe, or Co). The CVD method can result in MWCNTs or single-walled carbon nanotubes (SWCNTs). The CVD method is easy to scale up, which favors commercial production. For the laser ablation method, a mixture of carbon and transition metals such as Co and Ni is vaporized directly by a laser impinging on a metal–graphite composite target. In contrast to the arc discharge method, direct vaporization allows a far greater control over growth conditions, permitting continuous operation and preparation of nanotubes in higher quality. The laser ablation method tends to produce a small amount of clean nanotubes, whereas the arc discharge method generally produces larger quantities of nanotubes but also much more impurity.

One-Step Cutting of Multi-Walled Carbon Nanotubes Using Nanoscissors

Cutting of multi-walled carbon nanotubes by solid-state reaction

Preparation of short and water-dispersible carbon nanotubes by solid-state cutting

Cutting and Sharpening Carbon Nanotubes Using a Carbon Nanotube ‘Nanoknife’

High-speed Shearing Process As a Novel Strategy Toward Tailoring Ultra-Short Carbon Nanotubes

A Multi-Step Strategy for Cutting and Purification of Single-Walled Carbon Nanotubes

Machining Carbon Nanotubes into Uniform Slices.

Controlled Oxidative Cutting of Single-Walled Carbon Nanotubes

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Laser assisted selective removal of metallic carbon nanotubes

An Integrated Route for Purification, Cutting and Dispersion of Single-Walled Carbon Nanotubes

Manipulation and Cutting of Carbon Nanotubes

Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal

An Effective Process for Cutting Carbon Nanotubes Via Fenton Reaction

Engineering Multiwalled Carbon Nanotubes Inside a Transmission Electron Microscope Using Nanorobotic Manipulation

Tailored Cutting of Carbon Nanotubes and Controlled Dispersion of Metal Nanoparticles Inside Their Channels

Concentration and Temperature Controlled Oxidation and Cutting of Single-Walled Carbon Nanotubes by Ammonium Persulfate

Synthesis and Purification of Carbon Nanotubes

Manipulation of Ultralong Single-Walled Carbon Nanotubes at Macroscale

Synthesis of High Quality Single-Walled Carbon Nanotube Silks by the Arc Discharge Technique

Facile manipulation of individual carbon nanotubes assisted by inorganic nanoparticles.