Abstract:Background Driven by emission regulations, the technology of emission control catalysts has been under increasing need for development. Understanding the deactivation mechanism of aged or spent automobile exhaust catalysts is the key to extending their service lifetime. However, the lack of comprehensive microstructural characterization results in an incomplete understanding of their physicochemical properties. Deactivation mechanism of automobile exhaust catalysts is a considerably complex phenomenon, it can be classified into three groups based on its origin: thermal sintering, chemical poisoning and mechanical deactivation. Results In this study, an aged high-mileage automobile exhaust catalyst with Pd and Rh active phases supported on a cerium zirconium oxide–doped alumina coating on cordierite was analysed; six consecutive monolithic blocks along the inlet to the outlet of the aged catalyst were extracted, and the corresponding metallographic samples were fabricated using the vacuum impregnation resin method. The purpose of this study was to accurately characterize the different regions of the monolith via electron probe microanalysis and to infer potential causes of catalyst deactivation. Two major causes of deactivation were found: (1) aggregation and alloying of precious-metal particles caused by thermal sintering and (2) chemical poisoning caused by sulphur and phosphorus. Other mechanisms, such as mechanical degradation, which mainly manifests as the loss or wear of the washed coating, were also found to be involved in deactivation. Additionally, the catalytic activity tests showed a considerable decrease in the aged catalyst. The poison concentration trends in the washcoat indicated that P is detrimental to CO oxidation, while S accumulation affects propane oxidation. Significance This analysis method can be of substantial practical significance in developing advanced washcoat materials. Meanwhile, it has great potential in the washcoat analysis of honeycomb-shaped monolithic catalyst, such as natural gas catalyst, diesel vehicle oxidation catalyst and other honeycomb catalysts applied in chemical industry.

Comparison and research of acid digestion technique for Pt, Pd and Rh in catalysts

Progress in Research of Digestion Method of Automotive Catalyst Samples

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Performance Parameters of Inductively Coupled Plasma Optical Emission Spectrometry and Graphite Furnace Atomic Absorption Spectrometry Techniques for Pd and Pt Determination in Automotive Catalysts

Kinetically-controlled growth of cubic and octahedral Rh-Pd alloy oxygen reduction electrocatalysts with high activity and durability.

Reclamation Of Acid Pickling Waste: Preparation Of Nano Alpha-Fe2o3 And Its Catalytic Performance

The Acid Roles of PtSn@Al2O3 in the Synthesis and Performance of Propane Dehydrogenation

PREPARATION AND PROPERTIES OF PT-RH-PD / CEO2-ZRO2-LA2O3-AL2O3 FIBROUS CATALYST VIA ELECTROSPINNING

Structure characterization of aged automobile exhaust catalysts using electron probe microanalysis

Solvothermal synthesis and characterization of Pd–Rh alloy hollow nanosphere catalysts for formic acid oxidation

Correlation among Preparation Methods/Conditions, Physicochemical Properties, and Catalytic Performance of Rh/Hydroxyapatite Catalysts in N2o Decomposition

Tailoring Pore Shapes of Catalysts for Diesel Hydrodesulphurization

Isotope dilution inductively coupled plasma time-of-flight mass spectrometry (ID-ICP-TOFMS) with desolvating sample introduction and He collision gas for high-accuracy determination of Rh, Pd and Pt in automobile catalytic converters

Investigation on the Coordination Mechanism of Pt-containing Species and Qualification of the Alkaline Content During Pt/C Preparation Via a Solvothermal Polyol Method

Catalytic Performance Comparison of Shape-Dependent Nanocrystals and Oriented Ultrathin Films of Pt4Cu Alloy in the Formic Acid Oxidation Process

Recovery of Platinum and Palladium from Spent Automotive Catalysts: Study of a New Leaching System Using a Complete Factorial Design

A New Reduction Method Based on Simultaneous Ti3AlC2 Support Etching and Metal Deposition to Prepare Pt Catalysts for Aqueous-Phase Selective Hydrogenation of Furfural to Furfuryl Alcohol

STUDY ON THE SULFUR CONVERSION OF EX-SITU PRESULFURIZED HYDROGENATION CATALYST

The Effect of Chromium on Sulfur Resistance of Pd/HY–Al2O3 Catalysts for Aromatic Hydrogenation

Improving the Catalytic Activity of Pt-Rh/C Towards Ethanol Oxidation Through the Addition of Pb

Acid Modification of Platinum-Based Soot Oxidation Catalysts: A Short Review