Abstract:This study investigated the impact of diverse Pt–Pd ratios on the activity and performance of DOC. A range of Pt–Pd catalysts with different Pt–Pd ratios and monometallic Pd and Pt catalysts on Al 2 O 3 support were evaluated systematically. 0.5%wt PGM was used to avoid the high catalyst costs. The light-off temperatures and conversion efficiencies of CO, NO, and C 3 H 6 were investigated under simulated diesel exhaust conditions. Several scientific techniques were used to characterize the catalysts, such as XRD, XPS, H 2 -TPR, and CO 2 TPD. The results demonstrated that using bimetallic Pt–Pd catalysts on Al 2 O 3 support significantly improved light-off temperatures and conversion efficiency than monometallic Pt and Pd catalysts. The order of light-off temperatures and CO and C 3 H 6 conversions was: 0.4Pt0.1Pd < 0.3Pt0.2Pd < 0.2Pt0.3Pd < 0.1Pt0.4Pd < 0.5Pd < 0.5Pt. The synergistic enhancement of catalytic activity can be ascribed to the coexistence of active sites for Pt and Pd. 0.4Pt0.1Pd bimetallic catalyst showed best activity and stability in conversion of CO and C 3 H 6 among all catalysts. As a result of the competitive adsorption of C 3 H 6 and CO on Pt surface, which restricts the availability of adsorbed oxygen, the monometallic Pt/Al 2 O 3 catalyst demonstrated high light-off temperatures and slow CO and C 3 H 6 conversion rates. However, the Pd/Al 2 O 3 catalyst showed very stable conversion efficiency, demonstrating metallic Pd's higher stability than Pt/Al 2 O 3 . Results demonstrated that Pt can be prudently incorporated into Pd-catalysts to improve their catalytic activity. It is noteworthy that the optimal Pt to Pd ratio plays a vital role in balancing activity and stability. The careful use of Pt-modified Pt–Pd bimetallic catalysts holds promise for achieving desired emissions conversion conditions. For instance, the 0.4Pt0.1Pd bimetallic catalysts exhibited superior activity and stability in the conversion of CO and C 3 H 6 compared to other bimetallic catalysts. Pt loading above a specific amount may reduce activity due to Pt and Pd active site overlap and saturation.

Catalytic Purification of Exhaust Gases Over Pd–Rh Alloy Catalysts

Kinetically-controlled growth of cubic and octahedral Rh-Pd alloy oxygen reduction electrocatalysts with high activity and durability.

Partial substitution of rhodium with ruthenium in Pd-Rh nanoalloys and its impact on catalytic characteristics

Facile synthesis of Rh-Pd alloy nanodendrites as highly active and durable electrocatalysts for oxygen reduction reaction.

Facile synthesis of Pd-Pt alloy concave nanocubes with high-index facets as electrocatalysts for methanol oxidation

Dynamic tracking of exsolved PdPt alloy/perovskite catalyst for efficient lean methane oxidation

Optimizing Pt/Pd Ratios for Enhanced Low-Temperature Catalytic Oxidation of CO and C3H6 on Al2O3 Support

Light‐Off Performance of Three‐Way Catalysts Before and After Accelerated Aging Test with Engine‐Dynamometer

Multicomponent 3d Transition-Metal Nanoparticles as Catalysts Free of Pd, Pt, or Rh for Automotive Three-Way Catalytic Converters

Highly Active Bimetallic Single-Atom Alloy PdAg Catalysts on Cerium-Containing Supports in the Hydrogenation of Alkynes to Alkenes

Direct Mechanocatalysis with Pd Alloys

Durable PdNi/Al2O3 Catalysts with PdO-NiO and PdO-NiAl2O4 Dual Interfaces for Methane Combustion

Studies on High-Temperature Evolution of Low-Loaded Pd Three-Way Catalysts Prepared by Laser Electrodispersion

Nitrogen-doped carbon supported PtPd alloy nanoparticles exhibiting high catalytic activity for cyclohexane dehydrogenation under low temperatures

Thermal Deactivation of Pd/Al2O3–Cu/Al2O3-combined Three-way Catalysts via Cu Migration and Alloying

Carbonaceous nanocomposites decorated with Pd-Co alloy as catalyst for hydrogen evolution reaction

The Promotion of Ce‐based Solid Solution‐anchored PdRh Bimetallic Alloy by Co for Three‐way Catalysis

Fine-tuning of Pd-Rh core-shell catalysts by interstitial hydrogen doping for enhanced methanol oxidation

Pd-based Catalysts by Colloid Synthesis Using Different Reducing Reagents for Complete Oxidation of Methane

Structure-Property-Performance Relationship of Ultrathin Pd-Au Alloy Catalyst Layers for Low-Temperature Ethanol Oxidation in Alkaline Media

Coking- and Sintering-Resistant Palladium Catalysts Achieved Through Atomic Layer Deposition