Abstract:This paper presents the findings of the research aimed at developing computer models to determine the operating conditions in electric power systems (EPSs) feeding DC and AC railway substations. The object of the research is an EPS with a predominant traction load whose high-voltage power lines are connected to transformer and converter substations with 3 kV and 27.5 kV traction networks. The supply network includes 110 kV and 220 kV power lines. The EPS operating parameters are calculated based on the decomposition of the system into alternating and direct current segments. Calculations are performed for the fundamental frequency and high harmonic frequencies. The modeling technique is universal and can be used to determine the operating parameters and power quality indices for any configuration of an EPS and various designs of traction networks. With this technique, one can solve numerous additional problems, such as calculating the processes of ice melting in traction networks and power lines, determining electromagnetic field strengths, and assessing the heating of power line wires and catenary suspensions. The results obtained show that the voltages on the current collectors are within acceptable limits for all AC and DC electric locomotives. The levels of asymmetry on the 110 and 220 kV tires of traction substations (TP) do not exceed the normally permissible values. The values of the asymmetry coefficients for DC TP are tenths of a percent. With an increase in the size of traffic and in post-emergency conditions caused by the disconnection of communication between one of the support substations and the EPS, the asymmetry indicators on the 220 kV buses of AC substations may exceed the permissible limits. Phase-controlled reactive power sources can be used to reduce them. The analysis of the results of the determination of non-sinusoidal modes allows us to formulate the conclusion that the values of harmonic distortion go beyond the normative limits. Passive and active filters of higher harmonics can be used to normalize them. Calculations of thermal modes of traction transformers show that the temperatures of the most heated points do not exceed acceptable values.

Study on Power Systems Transient Stability Considering Traction Power Supply System Measurement-Based Load Model

Theory and practice of load modeling in power systems

Influence of Load Models in Sending and Receiving Ends of Henan Power Grid on Tie-line Stability Limit of Sending End

Online Damping Monitoring Approach Based on Disturbances of Traction Load and Its Application

Analytical Assessment for Transient Stability under Stochastic Continuous Disturbances

Stochastic models for study of electromechanical transient process in power systems

Research on Voltage Stability of HVDC Receiving-end System Based on Power Limit Trajectory

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Modeling and stability prediction for the static-power-converters interfaced flexible AC traction power supply system with power sharing scheme

The Small-Signal Stability Analysis of the Interacted Co-Phase Traction Power Supply System in Electric Railway

Research on Modeling and Power Supply Capability of AT Traction Power Supply System

Optimization Design of Electrified Railway Traction Substation and Installation of Capacity

A power system transient stability analysis based on MATLAB

Research on Low-Frequency Stability under Emergency Power Supply Scheme of Photovoltaic and Battery Access Railway Traction Power Supply System

Evaluation of Rail Potential and Stray Current with Dynamic Traction Networks in Multitrain Subway Systems

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Transient Stability Emergency Control Using Asynchronous Parallel Mixed-Integer Pattern Search.

Transient Stability Analysis of Large-scale Power Systems: A Survey

Analysis of the impact of traction power supply system containing new energy on the power quality of the power system

The Modeling and Simulation of DC Traction Power Supply Network for Urban Rail Transit Based on Simulink

Modeling the Operating Conditions of Electric Power Systems Feeding DC and AC Traction Substations