Abstract:A plane–strain numerical model has been developed to mimic a nailed loose fill slope under surcharge loading. The model has been used to back-analyse a field test that was conducted to examine the behaviour of soil nails in loose fill slopes under surcharge loading. Incremental elasto-plastic analyses coupled with pore water diffusion have been performed to study the internal deformation, water content redistribution in the soil, and the performance of the soil nails during and after the application of surcharge loading. The model parameters describing the mechanical and hydraulic properties of the nailed slope were obtained from field or laboratory tests. Different modelling techniques and boundary conditions for mimicking soil–nail interaction in loose fill material have been examined. Comparisons between numerical predictions and field measurements demonstrate that a new interfacial model, denoted as the embedded bond–slip interface model, is more suitable for mimicking the interfacial behaviour. Despite the simplicity of the numerical model, the predicted responses are in close agreement with the field test results, in particular the mobilisation and distribution of nail forces in response to surcharge loading. Both the numerical and the field test results suggest that soil nails are capable of increasing the overall stability of a loose fill slope for the loading conditions considered in this study. The increase in confining stress along the soil nails near the surcharge area is central to the overall stabilising mechanism. On the contrary, the nail forces mobilised near the nail heads are much smaller, indicating that the beneficial effect of having a structural grillage system at the slope face is limited for the range of surcharge pressures considered in this study.

Numerical analysis on strengthen mechanism of GFP-SN slope based on FLAC

Internal Force Calculation and Stability Analysis of the Slope Reinforced by Pre-Stressed Anchor Cables and Frame Beams

Study on Characteristics of Soil Nail Supporting Technique with Glass Fiber Reinforced Polymer

Slope Stability Analysis Based on Measured Strains along Soil Nails Using FBG Sensing Technology

Three-Dimensional Modeling of Spatial Reinforcement of Soil Nails in A Field Slope under Surcharge Loads

Failure behavior and mechanism of slopes reinforced using soil nail wall under various loading conditions

Numerical Simulation on the Stability of the Highway Cut Slope with Goafs

An Analytical Method for Predicting Load Acting on Geosynthetic Overlying Voids

Investigation of the evolutionary process of a reinforced model slope using a fiber-optic monitoring network

Numerical simulation on deep-hole grouting technology in weak broken boadway based on FLAC~(3D)

Field Pullout Testing and Performance Evaluation of GFRP Soil Nails

Comparative Analysis of Fiber Monitoring and Numerical Simulation on the K3 Slope of Guangdong-Jiangxi Expressway

Analysis of Deep Foundation Pit Pile-Anchor Supporting System Based on FLAC3D

Numerical Modelling of Soil Nails in Loose Fill Slope under Surcharge Loading

Centrifuge Model Tests of Deformation and Failure of Nailing-Reinforced Slope under Vertical Surface Loading Conditions

Computational modeling of three-dimensional slope reinforcement by anchor cable micropile group considering coordinated deformation

Numerical simulation analysis of anchorage characteristics of constant-resistance and large-deformation anchor cable for highly weathered rock masses

Influence of C and Φ Values on Slope Supporting by Soil Nailing Wall in Thick Miscellaneous Fill Site

Numerical and Experimental Investigation of Slope Deformation under Stepped Excavation Equipped with Fiber Optic Sensors

Large-scale field test on deformation mechanism and stability enhancement of soil slope reinforced by the micro-NPR bolt

EXPERIMENTAL RESEARCH ON STABILITY OF JINPING HIGH SLOPE WITH THREE-DIMENSIONAL GEOMECHANICAL MODEL