Abstract:The characteristics of geotechnical engineering related structure such as tunnels, foundations and retaining walls are as follows: (1) The structure is normally buried underground and visual inspection of the health condition is not possible in most cases. (2) Due to the complicated geological and hydrological conditions, a number of uncertainties are involved in the design and construction of geotechnical structures. (3) Some of the geotechnical structures are super long and large. Therefore, the requirements of real-time and long-distance monitoring of these geo-structures are of great importance. Some key geo-structures such as large-span tunnel, underground facilities and foundations require the measurement accuracy in the order of micron or millimeter. Hence the conventional monitoring techniques cannot meet the demands for geo-structure health monitoring.Brilliouin Optical Time Domain Reflectometry/Analysis (BOTDR/A) is a fully distributed measurement technique, which utilizes Brilliouin spectroscopy and Optical Time Domain Reflectometer/Analyzer to measure strains generated in optical fibers as distributed in the longitudinal direction. Fiber Bragg Grating (FBG) is a qusai-distributed monitoring technique, which is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. The reflected wavelength is proportional to the applied strain and temperature and the FBG sensor can therefore be used as a strain or temperature sensor. Because of the distinctive characteristics of the distributed optical fiber sensing technologies, they have been paid more and more attention and began to be used to construct monitoring systems of various geo-structures such as tunnels, embankments and soil nailed slopes. In this paper, the operation principles and merits of BOTDR/A and FBG are introduced; their application feasibility on the geo-structure health monitoring are analyzed based on the authors' research achievements and application cases; the related topics about application of BOTDR/A and FBG are discussed in detail, which include the installation methods of optical fiber, the impact of distance, temperature and humidity resolution on measurement results, the fatigue effect of optical fiber, the conversion from strain to deformation and the establishment of intelligent monitoring system. The research results show that the distributed optical fiber sensing technologies are quite applicable to the geo-structure health monitoring.

Comparative Analysis of Fiber Monitoring and Numerical Simulation on the K3 Slope of Guangdong-Jiangxi Expressway

Strain-Sensing Mechanism and Axial Stress Response Characterization of Bolt Based on Fiber Bragg Grating Sensing

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Application of Surface Deformation Monitoring of Slope Using BOTDR Technology

A Study On Botdr-Based Distributed Monitoring For Slope Engineering

Distributed Fiber Monitoring Test and Its Application to Slope Deformation

ANALYSIS ON THE STRAIN-FIELD OF SOIL CUT SLOPE BASED ON DFOS TECHNOLOGY MONITORING

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Distributed Fiber Optic Monitoring and Stability Analysis of a Model Slope under Surcharge Loading

Study on the Fixation Technique of Optical Fiber Based on BOTDR

Fiber optic based monitoring technologies of slope engineering

PHYSICAL MODEL TESTING OF SLOPE STABILITY BASED ON DISTRIBUTED FIBER-OPTIC STRAIN SENSING TECHNOLOGY

Distributive monitoring of the slope engineering

Application of Monitoring the Subgrade with the Distributed Brillouin Optical Fiber Sensing Technique in the Yi-Chang Expressway

Study on Slope Monitoring and Stability Based on Bolt–Cable Combined Support

STUDY ON DISTRIBUTED OPTICAL FIBER SENSOR-BASED MONITORING FOR SLOPE ENGINEERING

An Optical Fibre Monitoring System for Evaluating the Performance of a Soil Nailed Slope

Application of Distributed Optical Fiber Strain Measurement into Geotechnical Engineering Monitoring

Numerical and Experimental Investigation of Slope Deformation under Stepped Excavation Equipped with Fiber Optic Sensors

Application of Distributed Fiber Optic Sensing Technique to Monitor Stability of a Geogrid-Reinforced Model Slope

Laboratory studies on slope stability monitoring using distributed fiber-optic sensing technologies