Abstract:The Fourier transform spectrometer is based on a scanning-type Michelson interferometer with two optical-beams including reference laser and measurement light. The optical spectrum of measurement light can be obtained by colleting the analog signal of measurement light with the sampling time-scale based on interference fringes pulse of reference laser. The optical interferogram signal of the reference laser is converted to pulse signal, and it is subdivided into 16 times. So the sampling rate is constant only depending on frequency of reference laser and irrelative to the scanning-motor velocity. This means the sampling rate of measurement channel signal is on a uniform time-scale. In order to get optical spectrum, the analog signal of measurement channel should be collected and Fourier-transformed. Digital Signal Processor (DSP) TMS320-F2812 is used. Its internal 12-bit Analog-to-Digital Converter (ADC) for measurement channel is triggered by the 16-times pulse signal of reference laser. The DSP is used to process optical interferogram signal with ADC sampling rate up to about 1.5MHz. The optical spectrum of measurement channel signal is processed with 1024 points-Fast Fourier Transform (FFT) method. Then, the ZOOM-FFT is adopted. By digital frequency-shift conversion and low-pass filter, these digital signals are processed with 1024 points-FFT once again to improve the frequency measurement resolution. Finally, the optical spectrum of measurement channel will be displayed on LCD with high frequency-resolution.

Data acquisition system for NIR spectrometer based on DSP

Design of Data Acquisition and Processing System Based on DSP

Design and Implementation of a Portable Spectral Acquisition System

Development of ARM-based Measure & Control Analysis System of Portable Near-Infrared Spectrometer

A Multi-Channel Data Acquisition System Based on DSP

Design of CCD Data Acquisition System of Miniature Spectrometer

The Design of Data Acquisition System of the NIRS Instrument Based on USB

Data Acquisition Based on DSP at Aircraft Electrical Power System

Application of Zoom-Fft for Scanning-Type Spectrometer Based on Digital Signal Processor

Near-Infrared Spectrometer Optical Sensor Driving and Peripheral Circuit Design

Design of a Control System for a Visible/near-Infrared Real-Time Imaging Spectrometer

Design and Implementation of Data Acquisition Instrument Based on DSP for Strapdown North Seeker

Near-infrared Spectroscopy Using Digital Phase-Sensitive Detection

Control and Signal Acquisition System of Broad-Spectrum Micro-Near-Infrared Spectrometer Based on Dual Single Detector

The Design of Real-Time Data Acquisition and Display System of Fourier Transform Imaging Spectrometer Based on FPGA

Design and Realization of a TMS320F2812 -Based High- Speed Simultaneous Signal Acquisition System

High-Speed Image Sampling and Detection System Based on DSPC64X

Design of a High-Speed Spectral Signal Processing System with a Floating-Point DSP for FTIR Spectrometer

Data Acquisition System with Multi-channels Based on DSP

Design of data acquisition system based on DSP and PCI

Data Acquisition and Processing System Based on DSP and CAN Bus