Abstract:This paper, a multi-material topology optimization method (MMTO) is presented for two-dimensional structures using modified ordered solid isotropic material with penalization (SIMP) under multiple constraints such as mass, stiffness, frequency, and stress. The element density is obtained by a density filtering and the Heaviside approximation , which are combined to avoid gray elements and numerical issues of stress. Effective improvement of multiphase material topology optimization was performed including the criteria for stiffness, stress, and free vibration. P -norm stress aggregation is employed to calculate the maximum von Mises stress and sensitivity of von Mises stress is formulated by the adjoint method. The natural frequency and stress constraints are solved simultaneously to enhance the stability and reduce the stress concentration of the optimized structures, which are not much covered in the literature. The multi-mode phenomenon in the eigenfrequency problem is treated by the simply proposed technique. Results indicate that the multi-material designs with multi-constraints can be illustrated and optimized effectively. The optimized topologies, for stress minimization, indicate that the maximum stress can be significantly reduced compared with compliance minimization. The maximum von Mises stress of the topological results considering the maximum stiffness with natural frequency and mass constraints is higher than that maximum stiffness with only mass constraints, which indicates that the optimized structure created considering the eigenvalues is safer. The proposed approach can obtain a reasonable result that effectively controls the stress level and reduces the stress concentration at the high stress regions of multi-phase material structures with multi-constraints. Benchmark numerical examples are presented to confirm the effectiveness of the presented method.

TOPOLOGY OPTIMIZATION OF STRUCTURES DESIGNED WITH MULTIPHASE MATERIALS: VOLUME CONSTRAINT OR MASS CONSTRAINT?

Discrete Multi-Material Topology Optimization under Total Mass Constraint

A Mass Constraint Formulation for Structural Topology Optimization with Multiphase Materials

Comparison of volume constraint and mass constraint in structural topology optimization with multiphase materials

Topology Optimization of Thermo-Elastic Structures with Multiple Materials under Mass Constraint

Topology Optimization of Multiphase Material Structures under Design Dependent Pressure Loads

MULTIPLE OBJECTIVE TOPOLOGY OPTIMAL DESIGN OF MULTIPHASE MICROSTRUCTURES

Non-probabilistic Reliability Based Topology Optimization Design of Two-material Structures

Structural Topology Optimization Considering Casting and Stress Constraints under Uniform Dimensional Shrinkage

Topology optimization of continuum structures for natural frequencies considering casting constraints

Maximal Stiffness Design of Two-Material Structures by Topology Optimization with Nonprobabilistic Reliability

New Developments for an Efficient Solution of the Discrete Material Topology Optimization of Composite Structures

Topology Optimization Involving Thermo-Elastic Stress Loads

Multi-Material Topology Optimization for Spatial-Varying Porous Structures

Multi-material topology optimization with multiple volume constraints: a general approach applied to ground structures with material nonlinearity

A Solid Isotropic Material with Parallel Penalization Method for Structural Topology Optimization with Multiple Materials

Design of the multiphase material structures with mass, stiffness, stress, and dynamic criteria via a modified ordered SIMP topology optimization

The Lightweight Topology Optimization of Multi-Material Structures with Displacement Constraints

Topology Optimization of 3-D Solid Structures for Rotational Performance

On the design of multimaterial structural topologies using Integer Programming

ICM Method for Topology Optimization of Multimaterial Continuum Structure with Displacement Constraint