Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

The development of virtual instrument and its application in mechanical vibration measurement

Development Of Automatic Vibration Calibration System

Research of automatic control system for ultralow frequency vibration calibration

The Design of the Virtual Testing System of Vehicle Vibration Based on VR

Existing State and Development of Vibration Control Technology

Testing System of Characteristics of Electrical Vibration Table

Study on the Virtual Testing Platform of Vehicle Vibration Based on VR

Development for rotating machinery experimental system based on virtual instruments

Design and Implementation of Measurement System for Power Dissipation Characteristic of Vibration Damper Based on Virtual Instrument

Experimental Modal Analysis System Based on Virtual Instrument Technology

Mechanical characteristics of linear ultrasonic motors based on virtual instrument

Development of Electronic Measuring Instrument Platform Based on Virtual Instrument Technology

CVIS: Complex virtual instruments system architecture

Application of Virtual Instrument in Accelerator Beam Measurement System

The Application of Virtual Instrument Technology Combined with MATLAB in Harmonics Measurement System

Present Situation and Prospects of Vibration Sensors

Design and realization of ultrasonic testing system based on virtual instrument

Inertial Type Piezoelectric Vibration Acceleration Control System Based on Virtual Instrument

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

A Low-Frequency Vibration Experimental Platform for University Physics Experiment Designed by LabVIEW

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis