Abstract:Magnetorheological damper is one of the most promising smart devices for vibration mitigation of structures subjected to dynamic loads. In order to fulfill the value of magnetorheological damping control, a feasible mechanical model of magnetorheological dampers with simplicity and sufficient accuracy is usually required in practice. It comes up, however, with a challenging issue for the modeling of large-size magnetorheological dampers due to physical constraints on the performance test. The large-size magnetorheological damper is typically modeled in up-scaling parameters associated with models of the small-size magnetorheological damper. This treatment remains open since a size effect hinges upon the intrinsic non-linearity inherent in the device. In this article, a dynamic test of a small-size magnetorheological damper is performed first. The relevance of damper force with the input current and excitation frequency is well revealed. The modified Bouc–Wen model is employed to logically represent the dynamic behaviors of magnetorheological dampers. Identification of model parameters in typical loading cases is then proceeded, of which the functional relationship against input current is established. The size effect of magnetorheological dampers is further addressed through investigating the functional relationship relevant to maximum outputs of 200, 10, and 5 kN. It is indicated that the small-size magnetorheological damper needs more number of control parameters than the large-size magnetorheological damper. Moreover, a linear current relevance of model parameters appears in the small-size magnetorheological damper, while a quadratic current relevance of model parameters appears in the large-size magnetorheological damper. Size effect of magnetorheological dampers arises to be well-marked in the range of low current and becomes unapparent in the range of high current. Besides, the validation of modified Bouc–Wen model is carried out that reveals the applicability of the model with case-optimized parameters.

Parameter identification and test study of vane damp for tracked vehicle

Analysis of Characteristics and Identification of Hydraulic Parameters of Vane Dampers

Analysis of Damping Characteristics and Experiment on Controllable Damping Vane Damper

Identification method of vehicle parameters based on genetic algorithms

A Study on the Dynamic Performance for Hydraulically Damped Rubber Bushings with Multiple Inertia Tracks and Orifices: Parameter Identification and Modeling

Parameter Identification of Vehicle Powertrain Mounting System

Modeling and Parameter Identification for A Passive Hydraulic Mount

Modeling and analysis of the vibration characteristics of a new type of in-arm hydropneumatic suspension of a tracked vehicle

Research on Parameter Identification of the Mechanical Model of Damping Wall Based on Free Vibration Response

Study On Choising The Parameter Of A Mr Damper In Semi-Active Vibration Control Suspension Systems

Parameter Identifications of the Hydraulic Mount

Simulation Techniques for Nonlinear Dynamic Characteristics of Telescopic Hydraulic Dampers

Parameter Identification of Modified Bouc–Wen Model and Analysis of Size Effect of Magnetorheological Dampers

Research on Damping Contribution Rate of Key Parameters of Valve-Controlled Damping Adjustable Damper

Parameter Identification of Modified Bouc-Wen Model for MRF Damper Based on Genetic Algorithm and Nonlinear Least Square Method

A Parameter Identifying Method for Magnetorheological (MR) Fluids Dampers

Structural parameter effect of a railway hydraulic damper on its dynamic damping characteristics

The Parameter Model and the Non-Parameter Model of Magnetorheological Dampers in Suspension

Parameter identification of Bouc–Wen dynamic model for magnetorheological shimmy damper based on improved simulated annealing algorithm

Physical Parametric Model of an Automotive Electrohydraulic Semiactive Damper

Experimental Study and Parameter Identification of Viscoelastic Dampers