Abstract:Due to the unsteady nature of the flow around horizontal-axis wind turbines, the blades are subjected to severe unsteady and fatigue loads. This necessitates an in-depth aerodynamic analysis of flow control techniques to enhance the performance of a wind turbine as well as the lifetime of its components. Using OpenFOAM package in this study, a series of two-dimensional incompressible simulations are performed to present a deeper insight into the aerodynamic characteristics of an oscillating deformable trailing-edge flap, as a promising flow control device, in a sinusoidal pitching motion of an S809 airfoil. Herein, it is of particular interest to investigate the effects of deformable trailing-edge flap size, oscillation frequency, and the phase shift with reference to airfoil motion on lift and drag hysteresis loops. For this purpose, a pure-pitching motion of an S809 airfoil without flap deflection is considered as the benchmark problem in which the airfoil oscillates in the near-stall region at [Formula: see text]. After validation and verification of our simulations through comparison against the corresponding experimental and numerical work, a comprehensive investigation is conducted to study the effects of the aforementioned parameters on the aerodynamic loads. Our results reveal the fact that an out-of-phase deflection of the deformable trailing-edge flap with a frequency equal to the airfoil frequency can significantly mitigate the fatigue load. Under these circumstances, an increase in the deformable trailing-edge flap size can also help the airfoil experience less-severe loads in a cycle of motion. Furthermore, higher values of deformable trailing-edge flap frequency or other values of phase shift except the out-of-phase oscillation cannot alleviate fatigue loads. An airfoil under these conditions can, however, enhance the resultant load required for a blade rotation in the case of low wind periods.

Investigation of Unsteady Aerodynamic Performance for Wind Turbine Airfoil

Numerical Simulation of a Wind Turbine Airfoil: Dynamic Stall and Comparison with Experiments

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Lagrangian-based Numerical Investigation of Aerodynamic Performance of an Oscillating Foil

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Numerical Simulation Of Boundary Layer Seperation Flow For Airfoil In A Wind Turbine

Numerical Investigation of the Effects of Wind Tunnel Model Vibrations on the Measured Aerodynamic Properties of Airfoils and Wings

NUMERICAL SIMULATION OF PITCHING WIND TURBINE AIRFOIL DYNAMIC STALL

Influence of Flap Parameters on the Aerodynamic Performance of a Wind-Turbine Airfoil

Analysis of Flow Transition and Separation on Oscillating Airfoil by Pressure Signature

Numerical Simulation of Unsteady Aerodynamic Performance of Novel Adaptive Airfoil for Vertical Axis Wind Turbine

Simulation of Separated Flows at High Angles of Attack for Wind Turbine Airfoil and Its Dynamic Stall

Numerical assessment of a deformable trailing-edge flap on aerodynamic load control of a pitching S809 airfoil using OpenFOAM

Parametric Research and Aerodynamic Performance Analysis of Wind Turbine Airfoil with Added Flap

Experiment Investigation And Principium Analysis For Vibration On Aerodynamics Of A Model Airfoil

Dynamic Thin-Airfoil Stall and Leading-Edge Stall of Oscillating Wings at Low Reynolds Number

Numerical Study of Unsteady Viscous Flow Past Oscillating Airfoil

Numerical Investigations on Dynamic Stall of Low Reynolds Number Flow Around Oscillating Airfoils

Experimental and Numerical Study on Dynamic Stall under a Large Reynolds Number

SIMULATION OF SEPARATED FLOWS FOR THE NREL AIRFOIL USING ANISOTROPIC TWO-EQUATION TURBULENCE MODELS