Abstract:The quasi-Z-source inverter (qZSI) has been widely explored for renewable energy applications due to its superiority, e.g., higher boosting ratio and operational reliability, which is attained by inserting shoot-through (ST) states. As a conventional space vector modulation (SVM) method for the three-phase qZSI, the ZSVM6 method is easy to implement by dividing the ST time into six identical intervals. However, the instantaneous inductor current ripples of the qZSI with the ZSVM6 strategy are affected by the operating conditions, e.g., modulation index m and ST duty ratio dsh. In this article, the instantaneous inductor current ripples and the maximum current ripple in the qZSI with the ZSVM6 strategy under all operational conditions are explored in detail. The operational conditions are categorized into several cases according to the relationship among the duty ratios of the active states, null states, and ST states. More importantly, an improved ZSVM6 strategy is proposed to reduce the inductor current ripple for the qZSI, in which the maximum inductor current ripple is limited by making full use of the operational states. The proposed ZSVM6 strategy keeps the total ST time in a switching cycle while maintaining the axis-symmetry feature of the inductor current, but reduces the current ripple. Simulations and experimental results confirm effectiveness of the proposal when compared with the conventional ZSVM6 strategy for ripple current reduction.

DC-link voltage ripple analysis and impedance network design of single-phase Z-source inverter

Inductor Current Ripple Analysis and Reduction for Quasi-Z-Source Inverters With an Improved ZSVM6 Strategy

Impedance Network Impact on the Controller Design of the QZSI for PV Applications

Small-Signal Modeling And Experimental Validation Of The Three-Phase Quasi-Z-Source Inverter

Design and analysis of an LCL circuit-based three-phase grid-connected inverter

Impedance design of quasi-Z source network to limit double fundamental frequency voltage and current ripples in single-phase quasi-Z source inverter

Single-phase Z-Source inverter: Analysis and Low-frequency Harmonics Elimination Pulse Width Modulation

Design of Z‐Source and Quasi‐Z‐Source Inverters

Modeling And Control Of Single-Phase Quasi-Z-Source Inverters

Minimized Quasi-Z Source Network for Single-Phase Inverter

Analysis of Critical Inductance and Capacitor Voltage Ripple for a Bidirectional Z -Source Inverter

Analysis Of A Single-Phase Z-Source Inverter For Battery Discharging In Vehicle To Grid Applications

Suppression of Voltage Fluctuation on DC Link Voltage of Z-source

Energy Transfer Modes of the Quasi-Z-Source DC-DC Converter Considering Critical Inductance

Impedance Modeling and Stability Analysis of Three-Phase Four-Leg Grid-Connected Inverter Considering Zero-Sequence

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

Analysis and Design of Snubber Circuit for Z-source Inverter

MODELING AND DESIGN OF THREE-PHASE INVERTER WITH RECTIFIER LOAD

Study of an Improved Z-source Inverter: Small Signal Analysis

An Active Filter Method to Eliminate DC-Side Low-Frequency Power for Single-Phase Quasi-Z Source Inverter

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy