Abstract:The quasi-Z-source inverter (qZSI) has been widely explored for renewable energy applications due to its superiority, e.g., higher boosting ratio and operational reliability, which is attained by inserting shoot-through (ST) states. As a conventional space vector modulation (SVM) method for the three-phase qZSI, the ZSVM6 method is easy to implement by dividing the ST time into six identical intervals. However, the instantaneous inductor current ripples of the qZSI with the ZSVM6 strategy are affected by the operating conditions, e.g., modulation index m and ST duty ratio dsh. In this article, the instantaneous inductor current ripples and the maximum current ripple in the qZSI with the ZSVM6 strategy under all operational conditions are explored in detail. The operational conditions are categorized into several cases according to the relationship among the duty ratios of the active states, null states, and ST states. More importantly, an improved ZSVM6 strategy is proposed to reduce the inductor current ripple for the qZSI, in which the maximum inductor current ripple is limited by making full use of the operational states. The proposed ZSVM6 strategy keeps the total ST time in a switching cycle while maintaining the axis-symmetry feature of the inductor current, but reduces the current ripple. Simulations and experimental results confirm effectiveness of the proposal when compared with the conventional ZSVM6 strategy for ripple current reduction.

Analysis of Critical Inductance and Capacitor Voltage Ripple for a Bidirectional Z -Source Inverter

Inductor Current Ripple Analysis and Reduction for Quasi-Z-Source Inverters With an Improved ZSVM6 Strategy

Energy Transfer Modes of the Quasi-Z-Source DC-DC Converter Considering Critical Inductance

Impact of Space Vector Modulation Strategies on the Reliability of Impedance-Source Inverters

An Embedded Enhanced-Boost Z-Source Inverter

Generalized Space Vector Modulation for Ripple Current Reduction in Quasi-Z-Source Inverters

Critical Parameter Analysis and Design of the Quasi-Z-Source Inverter

Dynamic Analysis of a Current Source Inductively Coupled Power Transfer System

Small-Signal Modeling And Experimental Validation Of The Three-Phase Quasi-Z-Source Inverter

Impedance design of quasi-Z source network to limit double fundamental frequency voltage and current ripples in single-phase quasi-Z source inverter

Common-Mode Voltage Analysis and Reduction for the Quasi-Z-Source Inverter with a Split Inductor

Characteristic Analysis of the Grid-Connected Impedance-Source Inverter for PV Applications

Soft-switching Z-source inverters with coupled inductor

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy

Comprehensive Modeling of Single-Phase Quasi-Z-Source Photovoltaic Inverter to Investigate Low-Frequency Voltage and Current Ripple.

A High-Performance Z-Source Inverter Operating with Small Inductor at Wide-Range Load

Analysis of Sub-module Capacitor Voltage Ripples and Circulating Currents in Modular Multilevel Converters

Modified Impedance-Source Inverter with Continuous Input Currents and Fault-Tolerant Operations

Design of Z‐Source and Quasi‐Z‐Source Inverters

MODELING AND DESIGN OF THREE-PHASE INVERTER WITH RECTIFIER LOAD

Analysis Of Dc-Link Current Of Parallel Three-Phase Inverters Under Unbalanced Output Currents