Abstract:Polymer dielectrics for high-temperature capacitive energy storage suffer from low discharge energy density and inferior efficiency owing to their exponential growth of conduction losses at elevated temperatures and electric fields. The electrode and bulk-limited conduction losses are two types of conduction mechanisms in polymer dielectrics. Unlike previous nanodielectric strategies that involve incorporating wide bandgap inorganic components inside the bulk phase or on the surface of polymer films, herein, we describe a surface ion-activated polymer composite dielectric composed of abundant surface polycarboxylate (RCOO − ) ions to simultaneously inhibit the electrode and bulk-limited conduction losses. The strong electrostatic repulsion between the negatively charged dielectric surface and the metal electrode effectively alleviates the charge injection from the electrode and consequently leads to a reduction in the electrode-limited conduction loss. For the suppression of bulk-limited conduction loss, wide bandgap aluminium oxide nanoparticles in the bulk phase of dielectrics significantly increase the trap density and constrain the charge mobility, contributing to the suppression of conduction loss. Accordingly, the energy loss of polymer dielectrics at high temperatures and electric fields is thoroughly inhibited. Therefore, the discharge energy density with an efficiency of around 90% at 150 °C increases by 421.43% from 1.26 J cm −3 for the pure film to 6.57 J cm −3 for the ion-activated composites. More importantly, for the capacitive performance with an efficiency of ca. 90% at 200 °C, the activated composite sample exhibits a discharge density of 4.22 J cm −3 , which increases by 1355.17% in comparison to 0.29 J cm −3 of the pristine film and outperforms those of most existing polymer dielectrics. The concept of employing ions to regulate the electrode/dielectric interfacial charge transport and the strategy of simultaneously inhibiting electrode and bulk-limited conduction losses in this contribution provide a novel perspective and approach for the improvement of the high-temperature capacitive performance of polymer dielectrics.

Internal charging protection technology of typical space polymer dielectric material

Space Charge Dynamics in Epoxy Based Composites under DC and Square Pulse Wave of Different Polarities and Frequencies

Mitigating Deep Dielectric Charging Effects in Space

Research on the Induced Electrostatic Discharge of Spacecraft Typical Dielectric Materials under the ESD Pulse Irradiation

A Dielectric Polymer/Metal Oxide Nanowire Composite for Self-Adaptive Charge Release

Physical passivation of deep-level defect states in polymer dielectrics for outstanding dielectric properties

Space Charge Behavior in Epoxy‐Based Dielectrics: Progress and Perspective

Optimizing Energy Storage Performance in Polymer Dielectrics Through Dual Strategies: Constructing “peaked” Barrieras and Enhancing Carrier Scattering

Effectively Inhibiting Charge Injection and Dielectric Loss of High Permittivity Inorganic Materials by Rationally Coating Organic Polymer for Achieving High Output Charge Density

Surface ion-activated polymer composite dielectrics for superior high-temperature capacitive energy storage

Unifying and Suppressing Conduction Losses of Polymer Dielectrics for Superior High-Temperature Capacitive Energy Storage.

Space Charge Accumulation in Linear Low-Density Polyethylene with Surface Fluorination of the Semiconductive Electrode

Suppression of Space Charge in Crosslinked Polyethylene Filled with Poly(Stearyl Methacrylate)-Grafted Sio2 Nanoparticles

Polymer Dielectrics with Outstanding Dielectric Characteristics Via Passivation with Oxygen Atoms Through C-F Vacancy Carbonylation.

Preventing partial discharge in liquid metal polymer composites under steep voltage pulses

Frequency and Temperature-Dependent Space Charge Characteristics of a Solid Polymer under Unipolar Electrical Stresses of Different Waveforms

Designing F/P Hybrid Polymer As Ultrastable Cationic Shielding Interphase for High-Performance Lithium Metal Batteries

Tailoring Poly(styrene‐co‐maleic anhydride) Networks for All‐Polymer Dielectrics Exhibiting Ultrahigh Energy Density and Charge‐Discharge Efficiency at Elevated Temperatures

Ultra‐Low Loading Fillers Induced Excellent Capacitive Performance in Polymer‐Based Multilayer Nanocomposites under Harsh Environments

Regulation of deep and shallow hole/electron trap states and charge conducting behaviors of dielectric tribo-materials for maximizing retained charges

Advanced polymer dielectrics for high temperature capacitive energy storage