Abstract:For a gas bubble rising in quiescent liquid, most previous drag force models correlate the drag coefficient Cd to dimensionless parameters such as the Reynolds number Re, the Eötvös number Eo, and the Morton number Mo. However, it is still an open question if the current models can be applied to non-buoyancy-driven bubbles in a wide range of parameters. In the present study, we investigate the effects of Reynolds number Re and Weber number We on the drag force coefficient Cd of bubbly flows. To obtain a converged drag force, a dynamic body force model is developed, which constraints the bubble at a fixed position. A large number of numerical simulations are carried out, spanning in the (We, Re) parametric space. The correlations of Cd to We and Re are studied, respectively. We find that for low We, as the bubble keeps spherical, its drag coefficients can be well predicted by the previous spherical bubble models. For medium–high We, when Re is low, the viscous force contributes most, and therefore, the bubble deformation or We plays an insignificant role on the drag. In contrast, when Re is high, the pressure force or shape drag becomes dominant, which is strongly dependent of We. Therefore, we can identify three different regions, spherical, We-dependent, and We-independent, in the parametric space. Finally, a new empirical drag force model for a non-buoyancy-driven bubble is proposed based on the Cd-Re and Cd-We correlations obtained by our numerical simulations. The current model is superior to the previous drag models, with predicting errors within 20%, by compared to the direct numerical simulation and experimental data. More profoundly, the current model can apply to a wider range of parameters, that is, <math> 1 ≤ R e ≤ 1000</math> and <math> 0 ≤ W e ≤ 20</math>, particularly for high We, when the bubble deformation cannot be neglected.

Numerical Research on Microbubble Drag Reduction Downstream of Partial Ventilated Cavity

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

Experimental And Numerical Study Of Bubble Drag Reduction On A Flat Plate

Direct Numerical Simulation of Skin Friction Drag Reduction on Supersonic Turbulent Boundary Layers with Micro-Blowing

Numerical simulation of flow and heat transfer in journal bearing lubrication

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Stream-Wise Distribution of Skin-Friction Drag Reduction on A Flat Plate with Bubble Injection

Comparison Between Microbubble Drag Reduction and Viscoelastic Drag Reduction

Boundary layer analysis of ventilated partial cavity for friction drag reduction

Numerical study of frictional drag reduction using micro-bubbles in a vertical Couette-Taylor system

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Effects of Lateral Space and Angle of Attack on Ventilated Partial Cavity

Experimental Investigation on Underwater Drag Reduction Using Partial Cavitation

Numerical Study of the Influence of the Type of Gas on Drag Reduction by Microbubble Injection

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Numerical investigation of ventilated cavitating flow from high to low cavitation numbers

A numerical study on the drag law of a gas bubble using dynamic body force method