Analysis on the Mechanical Properties of Longitudinally Connected Ballastless Track Continuously Welded Rail on Bridge

CAI Xiaopei,GAO Liang,SUN Hanwu,QU Cun

2011-01-01

Abstract:Based on finite element method, considering the interaction between the rail, ballastless track bed, sliding layer and bridge, the longitudinal-transverse-vertical spatial coupled model of longitudinally connected ballastless track continuously welded rail on bridge is established. The influence law of the sliding layer friction factor, fastener longitudinal resistance and expansion stiffness of ballastless track bed on the force and deformation of the longitudinally connected ballastless track continuously welded rail on bridge is analyzed. Results show that the sliding layer weakens the interaction between bridge and track, and when the friction factor of the sliding layer ranges from 0.1 to 0.5, the contractility of continuously welded rail is only from 22.821 to 55.361 kN, which is much smaller than that of the general continuously welded rail on bridge; the smaller the sliding layer friction factor on bridge, the safer the track and bridge structure. The force and deformation of part of the track and bridge would be increased obviously by reducing the expansion stiffness of bed plate or track slab. When the bed plate/track slab expansion stiffness is reduced to 10%, the contractility nearly increases six times. So the crack of concrete of bed plate and track slab should be strongly controlled. The influence of the fastener longitudinal resistance on the force and deformation of the track and bridge is almost negligible, but the fastener resistance should not be too small to avoid rail creeping or the rail broken gap overrun.