Abstract:Structural damage in turbomachinery is a primary origin of aeronautic accidents, which is receiving increased attention. This study is thus focused on the aeroelastic analysis of damaged blades, including the onset of flutter and underlying mechanisms. First, a high-fidelity fluid–solid coupling system is established with computational fluid dynamics (CFD) and computational structural dynamics (CSD) technologies, via which the dynamic aeroelastic analysis is conducted based on static aeroelastic deformation. Second, a damaged rotor blade is parametrically modelled with variable damage levels, extents, and positions. Finally, the modal identification method of spectral proper orthogonal decomposition (SPOD) is applied to observe flow details and provide physical insight into the flutter mechanism for damaged blades. Numerical analysis finds that there is a critical damage level below which the aeroelastic stability is positively improved with increasing damage level; otherwise, a significant loss of stability is induced. The damage location and extent further affect this critical damage level and the change rate crossing the threshold. The simulation with CFD/CSD finds that the high pressure near the trailing edge induced from boundary layer separation suppresses vibrations in stable conditions, but motivates vibrations during flutter, which is because of the high-pressure spread to nearing blades. SPOD modes reveal that high-frequency disturbances with large scale are primary factors inducing flutter, which is further stimulated by the high-order disturbances with small scale. This study provides a crucial foundation for the fatigue prediction for rotor blades in service and the optimisation design for high-performance turbomachinery in the near future.

Numerical Study on Stall Flutter of Axial Turbomachinery Blade Based on Fluid-Structure Coupling

Investigation of the Flutter Stability of a Transonic Fan with Inlet Distortion

Numerical simulations of flutter mechanism for high-speed wide-chord transonic fan

Analysis of an Airfoil's Flutter Control Technique of Blowing by a Fluid-Structure Coupling Method

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Numerical Investigation of Classic Flutter Mechanism Under Circumferentially Non-Uniform Inlet Condition

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Coupled Fluid-structure Aeroelastic Analysis of Turbomachinery Using Conservative Data Transfer Algorithm

THREE DIMENSIONAL VISCOUS FLOW NUMERICAL ANALYSIS OF STALL FLUTTER IN STEAM TURBINE BLADES

Flutter analysis of compressor blades under travelling wave modes using an efficient fluid-structure interaction method

An Efficient Coupled-Mode Flutter Analysis Method for Turbomachinery

AEROELASTIC ANALYSIS ON AN AIRFOIL'S FLUTTER AND FLUTTER CONTROL TECHNIQUE OF BLOWING

Numerical Study of Unsteady Viscous Flow Past Oscillating Airfoil

Oscillatory Blowing Control Numerical Simulation of Airfoil Flutter by High-Accuracy Method

Analysis of dynamic stall development on a cross-flow turbine blade

Influence mechanism and quantificational evaluation of key factors affecting flutter stability of a transonic fan

Application of actuator disk model in blade fluidelastic stability study of hydraulic machine

Exploration on flutter mechanism of a damaged transonic rotor blade using high-fidelity fluid–solid coupling method

Aeroelastic Analysis of Oscillatory Blowing Control of the Airfoil'S Flutter at Large Attack Angle

Numerical Simulation of Aeroelastic Response in Compressor Based on Fluid-Structure Coupling

Transonic Wing Flutter Predictions by a Loosely-Coupled Method