Abstract:Magnetic microwires with amorphous structures can present a unique combination of excellent magnetic softness and giant magnetoimpedance (GMI) effects together with reduced dimensions and good mechanical properties. Such unique properties make them suitable for various technological applications. The high GMI effect, observed in as-prepared Co-rich microwires, can be further optimized by postprocessing. However, unexpected magnetic hardening and a transformation of the linear hysteresis loop into a rectangular loop with a coercivity on the order of 90 A/m were observed in several Co-rich microwires upon conventional annealing. Several routes to improve magnetic softness and GMI effect in Fe- and Co-rich magnetic microwires are provided. We observed that stress annealing could remarkably improve the magnetic softness and GMI ratio of Co-rich microwires. Thus, almost unhysteretic loops with a coercivity of 2 A/m and a magnetic anisotropy field of about 70 A/m are achieved in Co-rich microwires stress annealed at appropriate conditions. The observed change in hysteresis loops and the GMI effect is explained by stress-annealing-induced anisotropy, which is affected by the stresses applied during annealing and by the annealing temperature. While as-prepared Fe-rich amorphous microwires present a low GMI effect, appropriate postprocessing (annealing and stress annealing) allows for a remarkable GMI ratio improvement (an order of magnitude). The evaluated dependence of the maximum GMI ratio on frequency allows the identification of the optimal frequency band for the studied samples. The origin of stress-annealing-induced anisotropy and related changes in hysteresis loops and the GMI effect are discussed in terms of the relaxation of internal stresses, "back-stresses", as well as structural anisotropy.

Length effect on giant magneto impedance of melt-extracted amorphous microwires

Wire-Length Effect on Gmi in Co70.3fe3.7b10si13cr3 Amorphous Glass-Coated Microwires

Large Enhancement of Gmi Effect in Polymer Composites Containing Co-Based Ferromagnetic Microwires

Length Effect on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Ultra-large Giant Magnetoimpedance Effect by a 2D Square Spiral Amorphous Microwire

Influence of Varying Metal-to-glass Ratio on GMI Effect in Amorphous Glass-Coated Microwires

Collective Length Effect on the Magnetostatic Properties of Arrays of Glass-Coated Amorphous Alloy Microwires

Large GMI effect in Co-rich amorphous wire by tensile stress

Optimizing magnetoimpedance of amorphous microwires by nanocarbon-induced magnetic anisotropy

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Giant Magneto-Impedance Effect on Nanocrystalline Microwires with Conductive Layer Deposit

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Giant Magneto-Impedance and Stress-Impedance Effects of Microwire Composites for Sensing Applications

Correlation of Magnetic Domains, Microstructure and Gmi Effect of Joule-Annealed Melt-Extracted Co68.15fe4.35si12.25b13.75nb1cu0.5 Microwires for Double Functional Sensors

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Relating Surface Roughness and Magnetic Domain Structure to Giant Magneto-Impedance of Co-rich Melt-Extracted Microwires

Optimization of Giant Magnetoimpedance Effect of Amorphous Microwires by Postprocessing

Mechanical And Magnetocaloric Properties Of Gd-Based Amorphous Microwires Fabricated By Melt-Extraction