Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Cavitation of inclusion in elastic matrix under uniform changed temperature

Analysis of Cavitation Problem of Heated Elastic Composite Ball

Thermoelastic problem of two arbitrarily-shaped inclusions

Study on the Crack–inclusion Interaction with Coupled Mechanical and Thermal Strains

An elliptical compressible liquid inclusion in an infinite nonlinearly coupled thermoelectric matrix

Uniform Hydrostatic Thermal Stress Fields Inside Two Interacting Inclusions of Irregular Shape and Related Problem

An Isoparametric Inclusion Model for Determining the Thermo-Elastic Fields Produced by Varying Eigen-temperature Gradients

Analysis of a Finite Matrix with an Inhomogeneous Circular Inclusion Subjected to a Non-Uniform Eigenstrain

DECAGONAL QUASICRYSTALLINE ELLIPTICAL INCLUSIONS UNDER THERMOMECHANICAL LOADING

INSTANTANEOUS THERMAL-EXPANSION BEHAVIOR OF HETEROGENEOUS MATERIALS WITH A WORK-HARDENING ELASTOPLASTIC MATRIX AND ELASTIC SPHEROIDAL INHOMOGENEITIES

Cavitation in Hookean Elastic Membranes

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Study of thermal stress and strain energy in gamma Fe matrix around inclusion caused by thermal coefficient difference

On the Inclusion Model of Localized Heating in an Elastic Plane

Thermal Inclusions Inside A Bounded Medium

A crack in a confocal elliptical inhomogeneity embedded in an infinite matrix subjected to uniform heat flux

Solutions to Eshelby'S Problems of Non-Elliptical Thermal Inclusions and Cylindrical Elastic Inclusions of Non-Elliptical Cross Section

Determination of the Thermal Stress Produced by a Thermo-poro-inclusion of Spheroid-shaped Near a Free Surface

Elliptic rigid inclusion in soft materials of harmonic type

Inclusions in a Finite Elastic Body

Three-phase inclusions of arbitrary shape with internal uniform hydrostatic thermal stresses