Abstract:An improved multi-dimensional CFD code has been employed to simulate the spray, combustion and pollution formation process within a diesel engine cylinder. The computational results are compared with experimental data from an optical high-speed research engine equipped with a high-pressure injection system. Several spray sub-models have been implemented into the code, and their influence on the predicted droplet characteristic was evaluated. These models account for liquid core atomization, droplet secondary breakup, spray/wall interaction, droplet turbulent dispersion and evaporation. These models improve the prediction of the droplet sizes within a diesel spray and provides a more accurate initial condition for the evaporation, combustion models. The combustion sub-model employed has two components: one for predicting auto-ignition and one for computing the subsequent combustion of the ignited gas. Thermal NOx formation is calculated according to the extended Zeldovich mechanism, which gives the NOx formation as a function of temperature and O, H and OH radical concentrations. Soot formation process adopted in present study is modeled according to a hybrid chemical kinetics/turbulent mixing controlled rate expression. For the engine configurations and operating conditions considered, in most case the calculated cylinder averaged results show good agreement between measured and global pressure, heat release rate and emission data, but in some case they have limitations. Discrepancies are highlighted and possible reasons suggested. The major influences of the injection timing and combustion chamber geometry on the pollutant formation processes have been identified. The calculated results provide a detailed insight into the processes governing combustion and pollutant formation in spray flames under diesel engine conditions. The good agreement indicates that computer models are available for use by the engine industry to provide directions for engine design.

Investigation of Emission Characteristic of A Diesel Engine by Simulation

Diesel Engine Emissions Simulation and Test in Working Process

Study on injection characteristics of diesel and DME

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Experimental Investigation and Numerical Modeling of Spray Combustion and Emission in a Diesel Engine

Numerical Simulation of HCNG Engine on GT-Power

Characterization of diesel emission from in-use vehicles and an engine in Beijing, China

Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

Numerical Modeling of Diesel Engine Combustion and Emissions Under HCCI-Like Conditions With High EGR Levels

Gas Emissions and Particulate Matter of Non-Road Diesel Engine Fueled with F-T Diesel with EGR

Investigation of pollutants formation in a diesel engine using numerical simulation

Numerical Simulation and Experiment for Soot and NOx Emission in Diesel Engine

Modeling of Diesel Engine NO x Emission Based on Cylinder Pressure Signal

Combustion and Emission Characteristics of an Electronically-Controlled Common-Rail Dual-Fuel Engine

Investigation on Emission Characteristics of A Compression Ignition Engine with Oxygenated Fuels and Exhaust Gas Recirculation

Emission Evaluation for Diesel Vehicles Under Typical Operating Conditions

Study on Egr Control Strategy for Vehicle Diesel Engine Based on Experiment

Characterization of Exhaust CO, HC and NOx Emissions from Light-Duty Vehicles under Real Driving Conditions

One Dimensional Numerical Simulation of SI HCNG Engine

Numerical Simulation on High Density-Low Temperature Combustion in Diesel Engines