Abstract:Structural health monitoring (SHM) using self‐sensing cement‐based materials has been reported before, where nano‐fillers have been incorporated in cementitious matrices as functional sensing elements. A percolation threshold is always required in order for conductive nano‐fillers modified concrete to be useful for SHM. Nonetheless, the best pressure/strain sensitivity results achieved for any self‐sensing cementitious matrix are <0.01 MPa−1. In this work, we introduce for the first‐time novel partially reduced graphene oxide based electronic textile (e‐textile) embedded in plain and as well as in polymer‐binder‐modified cementitious matrix for SHM applications. These e‐textile embedded cementitious composites are independent of any percolation threshold due to the interconnected fabric inside the host matrix. The piezo‐resistive response was measured by applying direct and cyclic compressive loads (ranging from 0.10 to 3.90 MPa). A pressure sensitivity of 1.50 MPa−1 and an ultra‐high gauge factor of 2000 was obtained for the system of the self‐sensing cementitious structure with embedded e‐textiles. The sensitivity of this new system with embedded e‐textile is an order of magnitude higher than the state‐of‐the‐art nanoparticle based self‐sensing cementitious composites. The composites showed mechanical stability and functional durability over long‐term cyclic compression tests of 1000 cycles. Additionally, a two time‐constant model was used to validate the experimental results on decay response of the e‐textile embedded composites. We introduce novel reduced graphene oxide based electronic textile (e‐textile) embedded in cementitious matrix for structural health monitoring. The piezo‐resistive response was measured by applying direct and cyclic compressive loads (0.1 to 3.9 MPa). A pressure sensitivity of 1.5 MPa‐1 and an ultra‐high gauge factor of 2000 was obtained for the system of the self‐sensing cementitious structure with embedded e‐textiles. The sensitivity of this new system with embedded e‐textile is many orders of magnitude higher than nanoparticle based self‐sensing of cementitious composites.

A Cement Based Piezoelectric Composite Sensorfor Health Monitoring of Civil Engineering Structure

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Cement-based piezoelectric composite sensor designed for charactering the three-dimensional stress state in concrete

Self-sensing Joints for In-Situ Structural Health Monitoring of Composite Pipes: A Piezoresistive Behavior-Based Method

Piezoelectric Impedance Sensor-Based Structural Health Monitoring for Critical Members of Civil Infrastructures

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

Identification of Static Loading Conditions Using Piezoelectric Sensor Arrays

PZT Based Piezoelectric Sensor for Structural Monitoring

Piezoelectric Materials and Sensors for Structural Health Monitoring: Fundamental Aspects, Current Status, and Future Perspectives

Development And Application Of Structural Health Monitoring System Based On Piezoelectric Sensors

Piezoelectric composite cements: Towards the development of self-powered and self-diagnostic materials

Piezoresistive Behavior in Cement-Based Sensors: Nonlinear Modeling and Preliminary Application

Experimental study and piezoresistive mechanism of electrostatic self-assembly of carbon nanotubes–carbon black/epoxy nanocomposites for structural health monitoring

Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors

Monitoring the Early Strength Development of Cement Mortar with Piezoelectric Transducers Based on Eigenfrequency Analysis Method

Damage detection for structural health monitoring using ultra-sensitive flexible piezoelectret sensors

An electronic textile embedded smart cementitious composite

A Circuit Design for Piezoelectric Impedance-based Health Monitoring

Piezoelectric Transducer-Based Structural Health Monitoring

Ultra-High Sensitivity Anisotropic Piezoelectric Sensors for Structural Health Monitoring and Robotic Perception

Wireless Structural Health Monitoring for Critical Members of Civil Infrastructures Using Piezoelectric Active Sensors