Abstract:Active noise control algorithms without secondary path modeling are very appealing because they can effectively overcome the problems caused by imperfect secondary path model. For broadband noise control, subband structures have been adopted in these kinds of algorithms, where the full-band adaptive filter coefficients are obtained from subband filter coefficients with weight transformation. However, the usually used two-direction search method suffers from slow convergence if the secondary path phase is close to ±90°. To deal with this problem, a four-direction search method has been proposed in frequency domain, which is sometimes too complicated for practical applications. In this paper, a simplified algorithm is proposed to reduce the implementation complexity. In the proposed algorithm, the delay of the secondary path is estimated first, and then the estimated delay is used in the delay compensation to reduce the number of subbands. Two reference signals are generated in each subband and two update directions are used. Only one subband reference signal and one update direction are selected to approximate the phase response of the residual secondary path, and then the full-band adaptive controller coefficients are adjusted directly in time domain with them without the need of further weight transformation. Just like those existing subband algorithms, the simplified algorithm can obtain similar steady-state noise reduction performance as that of the FxLMS algorithm but without secondary path modeling. Simulations and experiments are carried out to demonstrate the feasibility of the proposed algorithm.

Secondary Source Modeling Based on Analogue Circuits of Electrical Mechanical and Acoustical Systems

Simulation and Research on Adaptive Acoustic Feedback Reduction System

A New Modeling Method of MEMS System's Noise

An Engineering-Effective Adaptive Model Algorithm Control (AMAC) and Simulation

Improving Active Noise Control Without Secondary Path Modeling Using Subband Phase Estimation

Experimental study of the active noise control algorithms without secondary path modeling

Multi-channel ANC System with Online Secondary Path Modeling for Turboprop Aircraft Cabin

A Simplified Adaptive Feedback Active Noise Control System

A Secondary Path-Decoupled Active Noise Control Algorithm Based on Deep Learning

A Compact Active Sound Absorption System Compensating Near-Field Effect of the Secondary Source

A Computation-efficient Online Secondary Path Modeling Technique for Modified FXLMS Algorithm

ACOUSTIC FEEDBACK CANCELLATION OF ACTIVE NOISE CONTROL SYSTEMS WITH OPTIMIZED SECONDARY PATH

Auxiliary Noise Power Scheduling in Active Noise Control Systems with Acoustic Feedback Path Modeling

Multichannel Learning-Based Spatially Extended Active Noise Control Via Model Matching and Sensor Transfer Function Interpolation

Modification of Frequency-Domain Active Noise Control Algorithm Without Secondary Path Modeling.

A Simplified Subband ANC Algorithm Without Secondary Path Modeling

An Improved Active Noise Control Algorithm Without Secondary Path Identification Based on the Frequency-Domain Subband Architecture

Development of active noise control simulation with virtual controller based on computational aeroacoustics

Simulation of Multi-channel Active Noise Control Based on Dynamic Neural Network

The Statistical Behavior of Phase Error for Deficient-Order Secondary Path Modeling

An active noise control method of non-stationary noise under time-variant secondary path