Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

Research on the Complete Dynamical Model of Tilting-Pad Bearings Considering the Coupling Moving of Shaft and Pads with Turbulent Oil Film

Research on the Complete Dynamic Model of Tilting-Pad Journal Bearings Including Fluid Film Temperature Effect

Research on the Full Dynamical Model of Tilting-pad Journal Considering the Coupling Moving of Shaft and Pads

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

Establishment of Approximate Analytical Model of Oil Film Force for Finite Length Tilting Pad Journal Bearings

The Method and Calculation Model of Dynamic Performances of Oil-film of Tilting-pad Bearing

An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping

Lubrication and stability analysis of nonlinear rotor-bearing system

Turbulent Model Analysis and Experimental Research for Lubrication Performance of Large Power Units Journal Bearing

Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing

Analysis of Oil Film Boundary Conditions of Tilting Pad Bearing Based on a Geometrical Model

Theoretical and Experimental Investigations on Directly Lubricated Tilting Pad Journal Bearing under Starved Lubrication

The Influence Of Pad Pivot Elastic Deformation On Static And Dynamic Coefficients For Fixed-Tilting Pad Journal Bearing

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

Study on the thermoelastohydrodynamic performance of tilting-pad bearings for large-scale power units

Analytical Method for Hydrodynamic Force in Finite-Length Tilting-Pad Journal Bearing Including Turbulence Effect

A Study of Linear and Non-linear Dynamic Performance for Tilting-Pad Thrust Bearing

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

An Analytic Model of Oil-Film Force on Hydrodynamic Journal Bearing of Finite Length