Abstract:The combustion efficiency of the afterburner has an important effect on the overall performance of the ducted rocket. In some difficult working conditions with low incoming air temperature or high flight altitude, it is more difficult to achieve efficient combustion in the afterburner. Therefore, this paper mainly solves the problem of low primary gas combustion efficiency in the afterburner of boron-based ducted rockets when the incoming air temperature is low. The flow field can be improved by optimizing the gas injection mode, so as to improve the combustion efficiency. In this paper, a synergistic impact gas injection device associated with angles of two directions is designed. By controlling the self-impact angle α of gas/gas, and the mutual-impact angle β of gas/air, efficient mixing and combustion is realized. Through numerical simulation, the mixing degree and combustion efficiency, as well as the contours of B 2 O 3 mass fraction are obtained, and the influence regularities and flow field characteristics are analyzed. The selection scheme of the optimal injection device is verified by a ground direct-connected experiment. Finally, through the jet observation experiments, the gas ejection form from the synergistic impact gas injection device is observed. The research of this paper shows that when the mutual-impact angle β is small, the larger the self-impact angle α is, the higher the mixing degree and combustion efficiency will be. When the mutual-impact angle β is large, each self-impact angle α has a high mixing degree and combustion efficiency. When the self-impact angle α is 40° or the mutual-impact angle β is 35°, the mixing can be completed in advance before the gas reaches the afterburner outlet. The higher the average mixing degree, the higher the combustion efficiency. This paper provides an innovative and efficient method for promoting combustion in the afterburner.

Numerical Investigation of Combustion about Injection Positions in Rocket Induced Secondary Combustion of RBCC Engine

Numerical Investigation on the Effect of Fuel-Rich Degree in the RBCC Engine under the Ejector Mode

Investigation of RBCC performance improvements based on a variable geometry ramjet combustor

Experimental and Numerical Investigations on the Ignition of RBCC Gas-Oxygen/Kerosene Rocket Ejector

Effect of area ratio and heat release method on the Ma∞ = 2-6 operation performance of rocket-based combined cycle engine

Large Eddy Simulation of Effects of Primary Rocket Jet on Low Frequency Combustion Instability in a RBCC Combustor

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Study on the effect of combustion efficiency of variable thrust rocket engines

Effect of synergistic impact gas injection device on secondary combustion in boron-based ducted rockets

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Influence of plasma-enhanced combustion on RBCC engine using URANS

Large Eddy Simulation of Combustion Characteristics in a Kerosene Fueled Rocket-Based Combined-Cycle Engine Combustor

Numerical Study of the Effects of Injection Conditions on Rotating Detonation Engine Propulsive Performance

Effect of the heat release on ejector-to-ramjet dynamic mode transition process in the rocket-based combined cycle engine

Effects of combustor geometry on the combustion process of an RBCC combustor in high-speed ejector mode

Effect of Primary Rocket Jet on Thermodynamic Cycle of RBCC in Ejector Mode

Experimental study on ejector-to-ramjet mode transition in a divergent kerosene-fueled RBCC combustor with low total temperature inflow

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

Numerical Investigation Of High Speed Combustion And Its Impact On Thermal Structure

Numerical Simulation of Inner Flow Field of a Pintle Injector Variable Thrust Rocket Engine

Effects of Configuration and Secondary Combustion on RBCC Thrust in Ejecting Mode