Abstract:For the aspheric optical surface finished with a doughnut-shaped MCF (magnetic compound fluid) polishing tool, the performance of the polishing tool depends mainly on the properties of the MCF slurry. Therefore, under-standing the effect of each MCF slurry component on the polishing characteristics is crucial to developing novel polishing techniques. In this paper, the polishing principle was depicted and the corresponding polishing jig was constructed with a six-degree-of-freedom manipulator. The conical surfaces, which were considered as special aspheric surfaces, were experimentally polished under proper polishing conditions to examine the effects of the carbonyl iron particles (CIPs) concentration and the sizes of the abrasive particles (APs) on the polishing ability to remove material/tool marks and improve work surface qualities. Theoretical analyses were also performed to gain a more comprehensive understanding of the behaviors of CIPs and APs in the magnetic field. The results were shown as follows: (1) The CIPs concentration affected positively the magnetization of the MCF slurry, leading to better performance in the removal rate of material/tool marks when a higher CIPs concentration of was applied. The best surface quality was attained with a CIPs concentration of 45 wt%. (2) Larger APs were beneficial for obtaining higher removal rates of material/tool marks. The APs with 1 mu m in diameter were preferred for achieving a better surface quality. (3) Ferric clusters were formed along the magnetic line of force and their orientations changed periodically to stir the APs with the magnet revolution. (4) The Aps, at a given working gap, can squeeze the work-surface. The squeezing action was much more intense when larger APs and the MCF slurry with a higher magnetization were employed. (5) The material removal model suggested that the material was removed due to the APs and the relative motion between the work-surface and APs.

Composite Tools Design for Electrolytic Magnetic Abrasive Finishing Process with Fem

Influence of Process Parameters and Initial Surface on Magnetic Abrasive Finishing of Flat Surfaces on CNC Machine Tools

Process Planning And Tool Design Of Magnetorehological Jet Finishing

Parametric Studies on Finishing of AZ31B Magnesium Alloy with Al2O3 Magnetic Abrasives Prepared by Combining Plasma Molten Metal Powder with Sprayed Abrasive Powder

Study of a Novel Cathode Tool Structure for Improving Heat Removal in Electrochemical Micro-Machining

The Multi-Physics Analysis for a Novel Tool Structure to Improve the Accuracy in Electrochemical Micro-Machining

Electrochemical Discharge Grinding of Metal Matrix Composites Using Shaped Abrasive Tools Formed by Sintered Bronze/diamond

A Sustainable Machining Method with High Efficiency, High Quality and Low Wear - Electric Arc Electrochemical Composite Machining

Study on the rheological and polishing properties of electromagnetic two-phase composite particles with abrasive characteristics

Finishing mechanism modelling on magnetic abrasive finishing behaviours with core-shell magnetic abrasive particles

Theoretical and Experimental Study of Magnetic-Assisted Finish Cutting Ferromagnetic Material in WEDM

Study On Mechanical-Electrochemical Machining With Wire-Combined Tool

Design and optimization of cathode for ECM of high-speed steel roll material based on multi-physics field coupling analysis

Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method

Determination of Residual Stresses and Surface Roughness Using Chemical Assisted Ball End Magnetorheological Finishing

Experimental study on polishing of fluid magnetic abrasives for the wire electrical discharge grinding surface of micro-shafts

An Analysis of the Tool Electrode Working Mechanism of Grinding-Aided Electrochemical Discharge Machining of MMCs

Effect of the Components of Magnetic Compound Fluid (MCF) Slurry on Polishing Characteristics in Aspheric-Surface Finishing with the Doughnut-Shaped MCF Tool

Hybrid post-processing effects of electropolishing-assisted magnetic abrasive finishing using CNTs-Co abrasive on stainless steel 316 surface

Design and processing behavior of large tubes with a rotating magnetic pole core-based magnetic abrasive finishing

Experimental Investigation on Magnetic Abrasive Finishing for Internal Surfaces of Waveguides Produced by Selective Laser Melting