Abstract:To investigate the flexural performance of steel-UHPC (ultra-high performance concrete) composite beams with welded steel shear keys (SSK), eight specimens were experimental studied by four-point bending test. The finite element (FE) models were established based on the experimental results, then, the failure mode, load, deflection, strain and relative interface slip were parametric analyzed. The influences of strength, dimensions and configuration of upper concrete slab, steel beams as well as SSK on flexural performance, in terms of load-deflection response, ductility and ultimate energy dissipation, were studied. The experimental results show that steel-UHPC composite beams have superior bearing capacity, deformation capacity, ductility and energy dissipation ability when compared with steel-NSC (normal strength concrete) composite counterparts. Increasing the height of upper concrete slab has a significant effect on improving bending capacity and flexural stiffness, while increasing the width has a significant effect on enhancing deformation, ductility and ultimate energy dissipation. Increasing the yield strength, thickness of web and flange of steel beams has significant effect on improving bending capacity. Reducing the SSK spacing or increasing the yield strength of SSK, height and thickness slightly improve the cracking, yield and ultimate loads, reduce deflections, enhance the flexural stiffness, slightly weakens the ductility and ultimate energy dissipation. Besides, four types of failure modes were defined, based on reasonable assumptions, formulae for bearing capacity were proposed, and the predicted results fit well with experimental results. The results can be taken as reference for the design and application of steel-UHPC composite beams in long-span and heavy-load structures.

Finite Element Analysis and Experimental Verification on Mechanical Properties of Steel Mash Reinforced HDPE Composite Materials

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Studies on Constitutive Relationship for Concrete Filled Steel Tube

Flexural Strength Of High-Strength Steel-Concrete Composite Beams With Varying Steel Grades

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

Numerical simulation and data-driven analysis on the flexural performance of steel reinforced concrete composite members

STUDY ON THE MECHANICAL PROPERTIES AND CONSTITUTIVE MODEL OF STEEL FIBER REINFORCED CONCRETE

Research on the Dynamic Mechanical Properties and Constitutive Models of Steel Fiber Reinforced Concrete and Polypropylene Fiber Reinforced Concrete

Efficient Numerical Simulation of Steel-Uhpc Composite Structures Based on a Fiber Beam-Column Model

Finite Element and Theoretical Analysis of High-Strength Steel-Strand Mesh Reinforced ECCs Under Flexural Load

FEM Analysis of Steel Strip Winding Reinforced Plastic Composite Pipes

FINITE ELEMENT NUMERICAL ANALYSIS OF TENSILE STRESS FIELD IN SHORT FIBER REINFORCED METAL MATRIX COMPOSITE

Investigation of elastic modulus and morphology of reinforcement phase on the stress distribution of copper matrix composites

Shear performance of partially encased composite beams with high-strength steel and UHPC

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

THE THEORITICAL RESEARCH IN THE YIELDING BEHAVIOUR OF TENSILE DEFORMATION IN SHORT FIBER REINFORCED METAL MATRIX COMPOSITE

Finite Element Analysis Of Steel-Concrete Composite Slab With Section Steel Ribs

Models of Steel Fiber Reinforced Concrete and Polypropylene Fiber Reinforced Concrete

An investigation of Fatigue Behavior and Residual Strength Model of Steel-GFRP Composite Bar