Abstract:Deformation measurement and integrity evaluation of the frame are vital for normal running of the heavy hydraulic press with steel wire wound.The full-field deformation measurement of the frame is realized hardly due to the limitations of the conventional testing method. By using the digital image correlation method(DIC), the full-field measurements of the deformation for the frame are performed for the loading-unloading cycles of the 400 MN die forging press. Cooling method is employed for simulating the pre-stress of the wound wire and then finite element method(FEM) simulations are performed for the pre-stressed and the combined loading cases of the frame.The FEM results agree well with the DIC experimental data, which verifies the validities of the FEM modelling. Researches on the frame deformation during the working cycles show that the deformation of the frame is basically symmetrical. The maximum changes of the horizontal spacingA2D2and the vertical spacingA1A3 are 5.45 mm and 1.53 mm respectively which meets the design requirement.The DIC method is used to effectively solve the problem of the full-field deformation measurement of the frame of the heavy hydraulic press, verify the FEM modeling of the frame and provide the beneficial reference for the design of the heavy hydraulic press with steel wire wound.

Design of New Condition Monitoring System and Data Analysis in Large Forging Die Hydraulic Press

Study of Dynamic Characteristics for Hydraulic System on 300mn Die-Forging Press

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Research on digital on-line stress monitoring system of main columns in hydraulic press

New stress testing system for columns in large forging hydraulic press

Research on Mathematic Model and Measuring Method of Moving Beam Attitude in Large Forging Hydraulic Press

Monitoring System of Large Die Forging Hydrostatic Press

The design and analysis on position measuring system of huge-scale die forging press

Investigation on the design of hydraulic high-speed punching press with a large press force and a long press stroke

Design of 300 MN Die Forging Hydrostatic Press Monitoring and Controlling System based on WinCC

Multiscale Modelling and Analysis on the Heavy-duty Hydrostatic Journal Bearing for a Precision Press Machine

Hydraulic System Design and Simulation of the Forging Manipulator

Development of smart cold forging die life cycle management system based on real-time forging load monitoring

Design and Implementation of Large Die-forging Water Press Control System

Optimized design of hydraulic control pattern of synchronous system in large scale die-forming hydraulic press

A Digital and Non-contact Method for Detecting Moving Beam Eccentricity in Forging Hydraulic Press Based on Machine Vision

Quality Control System for Forging Process of Ten-Thousand-ton Hydraulic Die Press Based on Predict Model

Finite Element Analysis for 40 Mn Die Forging Press

Deformation Measurement Based on Digital Image Correlation and Finite Element Analysis Based on Cooling Method of Heavy Hydraulic Press Frame

Integrative Measurement and Control Project for Large Forgings Based on Non-Contacted Measurement

Die Structure Analysis Of Stress Distribution During High-Strength Steel Stamping Process And Experimental Validation